590611

Gossen Metrawatt METRAport 40S Manual

26
Zoom out
Zoom in
Previous page
1/28
Next page
26 GMC-I Messtechnik GmbH
16 Maintenance
Attention!
!
Disconnect the instrument from the measuring circuit before opening to
replace batteries or fuses!
16.1 Batteries
Make sure that no battery leakage has occurred before placing your instrument
into service for the first time, or after long periods of storage. Repeat this
inspection on a regular basis thereafter.
If battery leakage has occurred, clean the electrolyte from the device completely
and carefully with a dampened cloth and install new batteries before placing the
instrument back into service.
If the „ “ symbol appears at the display, replace the batteries as soon as
possible. The instrument requires two 1.5 V batteries in accordance with IEC R 6
or IEC LR 6.
Replacing the Batteries
Attention!
!
Disconnect the instrument from the measuring circuit at all poles before
opening the battery compartment!
➭ Fold the instrument closed.
➭ Insert a coin or a similar object into the slot between the housing and the
battery compartment cover and press down until the battery compartment
cover snaps open.
➭ Fold the instrument open as far as it will go and remove the battery
compartment cover.
➭ Insert two 1.5 V mignon batteries per IEC R6 or IEC LR6 into the battery
compartment, making sure they are poled in accordance with the symbols.
➭ Replace the battery compartment cover and press into position until it
audibly snaps into place.
➭ Please dispose of depleted batteries in an environmentally sound fashion!
16.2 Fuses
Eliminate the cause of overload after a fuse or breaker is tripped before placing
the instrument back into service!
10 A Range
A humming sound originating from the 15 A circuit breaker is normal when
measuring high value alternating current.
If the miniature 15 A circuit breaker for the active current measuring range is
tripped, FUSE appears at the digital display and an acoustic signal is generated
simultaneously. Make sure that the red pin is popped out in the tripped condition,
i.e. that no adhesion or fusion has taken place. Short circuit the and 15 A jacks
with the selector switch set to the continuity test position, and “0L” must appear
at the display.
… 26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt METRAport 40S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt METRAport 40S in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info