590611

Gossen Metrawatt METRAport 40S Manual

27
Zoom out
Zoom in
Previous page
1/28
Next page
GMC-I Messtechnik GmbH 27
Attention!
!
Inspect the measuring circuit and eliminate the cause of overload
before activating the reset button at the miniature circuit breaker.
The fuse link connected in series to the auto-fuse may only be replaced by
authorized service personnel.
16.3 Housing / Opening of Equipment / Repair
No special maintenance is required for the housing. Keep outside surfaces clean.
Use a slightly dampened cloth for cleaning. Avoid the use of cleansers, abrasives
or solvents.
The equipment may be opened only by authorized service personnel to ensure the safe
and correct operation of the equipment and to keep the warranty valid.
Even original spare parts may be installed only by authorized service personnel.
In case the equipment was opened by unauthorized personnel, no warranty
regarding personal safety, measurement accuracy, conformity with applicable
safety measures or any consequential damage is granted by the manufacturer.
16.4 Device Return and Environmentally Compatible Disposal
The instrument is a category 9 product (monitoring and control instrument) in
accordance with ElektroG (German Electrical and Electronic Device Law). This
device is subject to the RoHS directive. Furthermore, we make reference to the
fact that the current status in this regard can be accessed on the Internet at
www.gossenmetrawatt.com by entering the search term WEEE.
We identify our electrical and electronic devices in accordance with
WEEE 2012/19EU and ElektroG with the symbol shown to the right
per DIN EN 50419.
These devices may not be disposed of with the trash. Please contact
our service department regarding the return of old devices.
If you use batteries or rechargeable batteries in your instrument or accessories
which no longer function properly, they must be duly disposed of in compliance
with the applicable national regulations.
Batteries or rechargeable batteries may contain harmful substances or heavy
metal such as lead (PB), cadmium (CD) or mercury (Hg).
They symbol shown to the right indicates that batteries or rechargeable
batteries may not be disposed of with the trash, but must be delivered
to collection points specially provided for this purpose.
17 Multimeter Messages
Message Function Significance
FUSE Current measurement Blown fuse or tripped miniature circuit breaker
In all operating modes Battery voltage less than 2.3 V
OL In all measuring modes Indicates overload
Pb Cd Hg
… 27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt METRAport 40S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt METRAport 40S in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info