590611

Gossen Metrawatt METRAport 40S Manual

12
Zoom out
Zoom in
Previous page
1/28
Next page
12 GMC-I Messtechnik GmbH
6 Voltage and Frequency Measurement
➭ Set the rotary switch to either V (TRMS) or V , depending upon the
voltage to be measured.
➭ You can switch back and forth between voltage and frequency
measurement in the V
switch position by pressing the FUNC key.
➭ Connect the measurement cables as shown. The jack must be grounded.
Note!
An intermittent acoustic signal warns the operator if the measured value
exceeds the measuring range upper limit in the 600 V range.
Attention!
!
Make certain that neither of the current measuring range is selected
(“A”) and that the measuring cables are connected to the right “V” und
“” jacks when the multimeter is connected for voltage measurement!
Both the operator and the instrument are in danger if the breaking
thresholds for the fuses are exceeded due to operator error!
Zero Balancing in the
300 mV Measuring Range
➭ Select the 300 mV
measuring range.
➭ Connect the measure-
ment cables to the instru-
ment and connect the
free ends to one another.
➭ Briefly press the FUNC key.
The instrument acknowledges
zero balancing with an
acoustic signal, and “000
.00”
(1 digit) and the ZERO
symbol appear at the LCD.
The voltage displayed at the moment the key was pressed is used as a reference
value (max. 2000 digits which
corresponds to 20 mV).
This value is automatically subtracted from all subsequently measured values.
➭ Zero balancing can be cleared:
– by pressing and holding the FUNC key,
after which clearing is acknowledged by
– a twice repeated acoustic signal,
by switching the instrument off.
– (+)
~
+ (–)
~
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt METRAport 40S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt METRAport 40S in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info