656011
7
Zoom out
Zoom in
Previous page
1/13
Next page
- 29 -
- 30 -
Setting the Transmitter
[Note 1]
Min. refers to the minimum power output value that can be set in M/Multi mode. 1/128 or 1/256 can be
set according to C.Fn-05.
The minimum power output value is 1/128 and cannot be set to 1/256 for most of camera flashes.
However, the value can change to 1/256 when using in combination with Godox strong power flashes
e.g. AD600, etc.
Multi Flash Group ON/OFF Settings
1. Open the multi flash in the C.Fn Custom
Functions (set C.Fn-04 as 1).
2. Short press the <GR> button to select the
group. Click to choose downwardly and
double-click to choose upwardly.
3. Short press the <MODE> Button to change
the mode of selected group.
4. The current group’s mode will be changed by
the order of on/-- (-- represents OFF, which
means that the current group will not fire
flashes in this mode).
Setting the Transmitter
Multi Flash Parameter Setting
1. Enter into multi flash mode before setting.
2. Press the <MODE> Button to enter multi
flash parameter setting menu.
3. Then, P (output value), T (flash times) and H
(flash frequency) will be displayed on the
LCD panel.
4. Short press the <GR> Button to choose the
settings. Turn the Select Dial to change the
blinking setting amount. Continue to press
the <GR> Button until all the amounts are
set. Then, short press the <MODE> Button to
exit.
Note: As flash times are restricted by flash output value and flash frequency, it might get
automatic adjustment.
The times that transported to the receiver end are a real flash time, which is also related to the
camera's shutter setting.
Group Settings
1. Long press the <GR> Button to set all the groups that in the same modes
simultaneously.
2. The settings of the groups which are in the same mode with the current group will
blink. Turn the Select Dial to change the settings.
3. If the current group is in the M mode, all the other groups which are in the M mode will
change their power output value simultaneously. The power output value is
changeable from 1/1 full power to Min. power in 0.3 stop increments, until one of the
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Godox X1TS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Godox X1TS in the language / languages: English as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info