656011
5
Zoom out
Zoom in
Previous page
1/13
Next page
Names of Parts
- 25 -
- 26 -
(A) Output Settings per Group in the M Mode; FEC Settings per Group in the TTL Mode
(B) Mode Settings (C) Group (D) Currently Selected Group (Operation Method 2)
(E) Channel Settings (F) Multi Mode Icon (G) Synchronization Delay Setting Icon
(H) Low Battery Indicator (I) Single Contact Icon
Transmitter Panel
CH
AB
C
D
E
H
G
I
F
Installing Batteries
As shown in the illustration, slide the battery compartment
lid of the transmitter and receiver and insert two AA batteries
(sold separately)separately.
Low Battery Indication
When the battery power (2 AA batteries <2.4V) gets low,
Status Indicator Lamp blinks quickly (blink cycle=0.5s).
Please replace new batteries, as low power leads to no flash
or flash missing in case of long distance.
Battery
Using the Flash Trigger
Note: To set ZOOM functions, please open the ZOOM functions on the camera flash.
1. As a Wireless Flash Trigger
1.1 Mount the transmitter on camera hotshoe and turn it
on before turning on the camera.
1.2 Set the transmitter and the receiver to the same
channel by pressing Channel Setting Button.
1.3 Press the camera shutter button, and the flash will
be triggered simultaneously. Status Indicator Lamp
of transmitter turns red.
The flash trigger features the following functions:
2. As a Wireless Flash Trigger with PC Sync Socket
2.1 Set the transmitter end and receiver end to the
same channel and group.
2.2 The transmitter will control the flash on the receiver
end to fire via using PC Sync Socket as input by
default.
2.3 Press the camera shutter and use the PC Sync
Socket's signal to control the flash.
2.4 PC Sync Socket can also be set as output. Long
press the <CH/OK> Button of the transmitter until
<Fn> is displayed on the panel. Then, set the value
of C.Fn-03 to ou, and the PC Sync Socket is under
output mode.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Godox X1TS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Godox X1TS in the language / languages: English as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info