656011
6
Zoom out
Zoom in
Previous page
1/13
Next page
- 27 - - 28 -
Setting the Transmitter
Slide the Power Switch to ON, and the device is on and Status Indicator Lamp will not
blink.
Note: In order to avoid power consumption, turn off the transmitter when not in use.
Power Switch
Slide the power switch to ON, and the AF lighting is allowed to output.
When the camera cannot focus, the AF assist beam will turn on; when the camera can
focus, the AF assist beam will turn off.
Power Switch of AF Assist Beam
Channel Settings
1. Short press the <CH/OK> Button until the
channel amount blinks.
2. Turn the Select Dial to choose the
appropriate channel. Press the <CH/OK>
Button again to confirm the setting.
3. This flash trigger contains 32 channels which
can be changed from 1 to 32. Set the
transmitter and the receiver to the same
channel before usage.
Setting the Transmitter
Mode Settings
1. Short press the <GR> Button and the
selected group will blink. Click to choose
downwardly and double-click to choose
upwardly.
2. Short press the <MODE> Button and the
selected groups' modes will be changed by
the order of TTL/M/--(-- represents OFF,
which means that the current group will not
fire flashes in this mode).
Group POWER / FEC Settings
1. Short press the <GR> Button and the
selected group will blink. Click to choose
downwardly and double-click to choose
upwardly.
2. Turn the Select Dial to change the power or
flash exposure compensation settings.
When the current group is in the M mode, the
power output value is changeable from
1/1 full power to Min. [Note 1] power in 0.3 stop increments. When the current group is
in the TTL mode, the FEC amount is changeable from -3 to 3 in 0.3 stop increments.
When the current group is in the -- mode (flash off), the amounts will not change.
3. Short press the <CH/OK> Button again to confirm the setting.
CH
CH
CH
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Godox X1TS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Godox X1TS in the language / languages: English as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info