Manual Giordani Citywave (page 24 of 44) (English, Dutch, French, Italian, Portuguese, Spanish)

769010

Zoom out

Zoom in

1/44

46 47

ventilation function with the holes facing down.

USE ON THE STROLLER

31. Fitting the carrycot: If you use the carrycot

on the frame, connect the adapter and push

the carrycot downwards until you hear a click

(see Fig. 31a/31b). The carrycot is correctly

mounted on the frame as shown in Fig. 31c.

32. Push catch C as shown by the arrow in Fig.

32a, lift button D on the bottom of the car-

rycot as indicated by the arrow and raise

it, then you can easily release the carrycot

from the stroller (see Fig. 32b/32c).

CARE AND MAINTENANCE:

For security purposes. This product requires

regular checks and maintenance. Keep all parts

clean. If the parts harden, apply a layer of sili-

cone-based spray lubricant. Metal parts, seat

and fabric parts - Wipe with a cloth dampened

in warm water with a mild detergent and dry. Do

not clean with abrasive detergents based on

ammonia, bleach or alcohol. The leg cover and

accessories can be removed for cleaning. The

hood can be removed by simply pulling it out

of the fasteners. Do not use solvents, chemical

detergents or lubricants on the parts of the seat

and never try to decolour or dye the fabric. Never

store the carrycot if it is still damp. Wait until it

has dried completely. If it is damp, leave it totally

open in a warm place and dry it with a soft cloth.

Storing the damp carrycot can cause mould for-

mation. Use in the vicinity of the sea can cause

the formation of salt deposits. Keep the carrycot

regularly clean with a soft cloth moistened with

warm water and a mild detergent. Use the carry-

cot in compliance with the instructions to avoid

any damage. Perform general maintenance on

the carrycot before using it for a second child.

MATERIALS

Lining: 100% polyester

Structure: aluminum

DIMENSIONS

L: 97.5 cm;

H: 60 cm;

D: 107 cm.

WARNINGS

• WARNING: Only use on a firm, horizontal lev-

el and dry surface.

• WARNING: Do not let other children play un-

attended near the carry cot

• WARNINGS: Check regularly the handles and

bottom of the carry cot in order to notice any

possible damage or wear and tear. Specifical-

ly, check the carry handle and the bottom of

the carrycot

• Ensure that the handle is in the proper posi-

tion for transport before lifting or transport-

ing the carrycot.

• Before lifting or transporting the carrycot,

the base needs to be adjusted to the lowest

position.

• The child’s head in the carrycot must never

be kept lower than the child’s body.

• WARNING: The restraint system must be re-

moved when the product is used outside the

car.

• Child shall never be left in this product un-

attendedin the carry cot! Always keep child

in view.

• Use only replacement parts supplied or ap-

proved by manufacturer.

• Never overload the carrycot with an addition-

al child or any objects.

• This product is suitable for children from

birth to approximately 0-9 months.

• This product is suitable for a child who can-

not sit up by itself, roll over and cannot push

itself up on its hands and knees. Maximum

weight of the child: 9 kg.

• Never use the carrycot in passenger seats

with airbags.

• The carry cot only can be installed on the

rear bench seat of the car as described in the

instruction, never install on the front seat.

• Always use the carrycot with fastening the

harnes s correctly.

• Never use the carrycot without fastening har-

ness into the car or stroller.

• Make sure the carry cot can be fixed firmly

when used on the assigned stroller.

• The buckle should always be easily acces-

sible.

• Children should never play with the buckle.

• It is in important that the child can be re-

leased quickly in the event of an emergency.

• Only suitable if the approved vehicles are fit-

ted with 3 point static or with retractor safety

belts, approval to UN/ECE regulation No.16

or other equivalent standards.

• The child should be clear of moving parts

while making any adjustments. Be particular

careful when performing these tasks with the

child nearby.

• Never store or use the carry cot in a humid,

cold and high temperature place, keep it

away from fire or heat source.

• Never carry the product by second lock, and

keep the handle upwards.

• We strongly recommend that change the

damaged accessories or parts.

• Any luggage or other objects liable to cause

injuries in the event of a collision shall be

properly secured.

• Contact your nearest retailer while have any

problems or question in use.

• This product is only suitable for a child who

cannot sit up unaided.

• Do not use if any part is broken, torn or miss-

ing.

• Always use the restraint system.

• No additional mattress shall be added unless

recommended by the manufacturer.

• WARNING use a harness as soon as your

child can sit unaided.

GR 0+ CAR SEAT

FITTING THE SAFETY SEAT

FOR CHILDREN IN THE CAR

33. This product is suitable for mounting with three-

point belts that will be divided into belts for the

sides and shoulders, as shown in Fig. 33a.

34. Position the child car seat on the seat in a po-

sition that is in the opposite direction pf travel,

or with the back facing forward. The transport

handle must be locked in a vertical position, as

shown in Fig. 34a.

35. Insert the upper part of the seat belt along the

front part (foot side) between the body and the

two hooks for the belt, as shown in Fig. 35a

36. Position the upper part of the seat belt around

the car seat and slide it into the hook on the

back, as shown in Fig. 36a.

37. The fastening hook holds the seat belt in

place, as shown in Fig. 37a.

38. Insert the seat belt part in the buckle. Make

sure the seat belt is not twisted. Tighten it as

much as possible. Check once again that the

belt passes through all three blue hooks, as

shown in Fig. 38a.

USE OF THE CAR SEAT

39. Loosen the shoulder straps by pressing the

quick release button and pull the shoulder

straps towards you as shown in Fig. 39a, then

lower the lap strap as shown in Fig. 40a.

40. Join the hooking rings and insert them into

the buckle as shown in Fig. 41a.

41. Tighten the shoulder straps using the quick

adjustment belt on the front side. The eyelet

can be xed under the edge of the lining.

42. Adjust the height of the shoulder straps. The

shoulder straps must pass through the slots

located above the child's shoulders, as shown

in Fig 42a. Pull the shoulder straps through

the slots in the shell and lining. Pass the shoul-

der straps back to the desired height and use

the same slots in the shell and lining. Verify

that the straps can be used correctly and that

they are not twisted.

43. Simultaneously press the buttons on both

sides of the carrying handle and then adjust

the handle to the desired position. The but-

tons will return to their initial position once

the handle is in position 1. transport/guide

position 2. sleep/rocking position. 3. sitting

position, as shown in Fig. 43a.

REMOVING THE LINING

First of all remove the belt pads, open the edge of

the sun canopy as much as possible. Then pull the

locking rings and the adjustment strap through the

openings. To place the lining on again, follow the

instructions above in reverse order.

MAINTENANCE

The seat can be cleaned with warm water and

soap. Do not use abrasive detergents. The lin-

ing must be hand-washed (maximum 30° C). Do

not use a tumble dryer. The belt buckle can be

cleaned with hot water. Do not lubricate. To en-

sure optimal and safe use of car seats, it is advis-

able not to use them for more than 5 years from

the date of purchase. The aging of plastic, caused

for example by exposure to sunlight (UV), could

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Giordani Citywave in the language / languages: English, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Giordani Citywave Manual

Product: