813466

Gazco Marlborough Electric ECO Manual

6
Zoom out
Zoom in
Previous page
1/52
Next page
6
REMOTE CONTROLS
The remote control should be left on a flat surface in the room where
the appliance is installed and away from any direct flow of hot air.
Timer in Normal
Mode
Flame
Power
Heating/ Advance
Mode
Temperature Sensor
Convection
Display
Fuel Bed
Heating Period
Battery Power
Actual Room
Temperature
Timer Mode
Advance
Temperature
Setting
Time and Day
Comfort
Setting
Signal Code
The remote control works by radio signal.
The handheld transmitter is configured in the factory with a unique signal
code.
IMPORTANT: If the handset loses signal or needs to be replaced, see
Servicing Section for details.
NOTE: The remote control has a Battery Status indicator
(top right corner), after an extended period of displaying
empty the LED screen will cease to function despite the
handset still being able to send commands
Replace the batteries to restore display.
Turn on/off
Press button to turn on the flame effect.
Press button to turn off all the functions under the normal heating
control mode including flame effect and fan heater.
Press button to turn off the flame effect under daily and week timer
heating mode.
Week Days/ Time/ Comfort Temperature and Unit Setting
On activation it is recommended that the clock is reset to the correct time to
ensure accuracy of the appliance operation.
Hold the button for 3 seconds to enter the setting screen.
Press the ‘’ or ‘’ button to choose setting to change.
The selected character will be highlighted.
Press the ‘+’ or ‘-’ button to adjust the number.
Time: 24-hour system.
Select Comfort temperature from 15-25℃.
Temperature unit: ℃/℉.
Press the button for 3 seconds or wait 10 seconds to save and exit the
week, time and heating temperature setting.
Daily Timer Heating
The following heating periods have been preset, these can be altered if
desired:
06:00 until 08:00
17:00 until 22:00
Press until shows at the upper right corner of the screen to enter
the daily timer heating mode.
Hold the button for 6 seconds to enter the daily heating setting.
A maximum of 3 timed heating periods can be set per day.
Press ‘’ or ‘’ to choose hour or minute.
Press ‘+’ or ‘-’ to set the number.
The minute increment / decrement by 15min per press.
Hold the button for 3 seconds or wait for 10 seconds to save and exit
the heating time period setting.
Check the timer setting. Press to check the daily timer mode.
If the heating needs to be turned off, it will be necessary to go back to the
Normal Control Mode to it turn off.
ENGLISH
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Marlborough Electric ECO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Marlborough Electric ECO in the language / languages: English, Dutch, French, Italian, Norwegian as an attachment in your email.

The manual is 3.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info