813466

Gazco Marlborough Electric ECO Manual

8
Zoom out
Zoom in
Previous page
1/52
Next page
8
ENGLISH
Week Timer Heating
The following heating periods have been preset, these can be altered if
desired:
From Monday to Friday
06:00 until 08:30
17:00 until 22:00
From Saturday to Sunday
06:30 until 09:30
11:00 until 13:00
17:00 until 22:00
Press until shows at the upper right corner of the screen to enter
the week heating mode.
Hold the button for 6 seconds to enter the week timer heating mode
setting.
Press ‘’ or ‘’ to move the cursor (a flashing underline).
Press the button in the corresponding week position to select (the
character is highlighted) or cancel (the character is displayed normally) the
current setting, the same time period can be selected together.
Press the ‘’ button to move the cursor to the time period setting area.
Press ‘’ or ‘’ button to choose hour or minute.
Press ‘+’ or ‘-’ to set the number.
A maximum of 3 timed heating periods can be set per day.
Minute increment / decrement by 15min per press.
Press to set the heating time for the selected day and return to the
week line.
Hold the button for 3 seconds or wait for 10 seconds to save and exit
the heating time period setting.
Press ‘’ or ‘’ to check the timer setting for the week timer heating
mode.
If the heating needs to be turned off, it will be necessary to go back to the
Normal Control Mode to it turn off.
When in Weekly Timer Mode switching the appliance off with the
remote will stop the light output. The heat output will continue
according to the timer settings.
Adjusting the Set Temperature
Press the ‘+’ or ‘-’ button to increase or decrease the temperature on the
basis of COMF temperature.
COMF means the actual temperature is the same as setting.
ECO means the actual temperature is 2℃ lower than the setting
temperature.
ECO- means 4℃ lower.
COMF+ means 2℃ higher.
COMF++ means 4℃ higher.
Adaptive start control
According to room temperature and set-pointed temperature, the heater will
automatically determine the appropriate time to heat to ensure that it will
reach the set-pointed temperature in the set time (up to 45 minutes prior to
the set time).
Advance mode
The heating state can be advanced to the next period is under both the daily
and week timer heating mode.
If the heater is on in the current period, pressing the button will turn the
heater off.
If the heater is off in the current period, pressing the button will turn the
heater on.
Whether the actual heating will be on/off also depends on the room
temperature and setting temperature.
Press to enter the Advance mode under the daily and week timer
heating mode, will show at the upper right corner of the screen.
Press again or timer period ends will exit the Advance mode.
Window open detecting
When the transmitter detects a rapid drop in room temperature, it will be
judged as an open window: the warning icon will be displayed and the
heating will be turned off automatically.
After indoor temperature rise or manual intervention (by operating remote
control), it will return to normal working state.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Marlborough Electric ECO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Marlborough Electric ECO in the language / languages: English, Dutch, French, Italian, Norwegian as an attachment in your email.

The manual is 3.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info