813466
5
Zoom out
Zoom in
Previous page
1/52
Next page
5
ENGLISH
OPERATING INSTRUCTIONS
WARNING! Do not operate the appliance if it is damaged
or has malfunctioned. If you suspect the appliance is
damaged or has malfunctioned call a qualified service
engineer to inspect the appliance, and replace any part
of the electrical system if necessary, before reuse.
Do not disconnect the power at the mains supply whilst the appliance
is running. Use the functions on the remote to turn the fire off and
ensure the mains switch has been moved to the off position before
disconnecting.
GENERAL
The appliance can be operated by the radio frequency handset or the
manual controls which located on the control panel located on the right-
hand side.
NOTE: To use both remote and manual functions the
manual on/off switch must be in ‘ON’ position. In order
to prevent the product becoming too hot, there is a 10s
delay when turning on the heater and a 10s delay when
turning off the heater fan.
The manual button controls basic functions, not a full
range of controls. Use the remote hand set to carry out
all functions.
PREPARATION BEFORE USE
Batteries:
Ensure that the handset batteries are new and inserted correctly.
Dispose of old batteries at an appropriate recycling facility.
LOCATION OF POWER SWITCH
The mains power switch is located on the control panel located on the right-
hand side.
Switch ON (—) before operating either the remote or manual controls.
A long beep is heard to indicate the fire is ready for use.
MANUAL CONTROL PANEL
The manual controls are located on the control panel located on the right-
hand side.
Mains Power
(On/Off) Switch
Fuel bed
setting button
Flame setting button
All Lights
On/ Off button
Reset Button for
Remote Control
Heater Running
Indicators
Turning on the appliance with the main power switch on ‘—‘ position. A long
beep will be heard.
Press “LIGHTS ON/OFF” to turn on or turn off both the flame and fuel bed
at the same time.
There are 3 flame colour options:
Press “FLAME” button to select the colour of flame or return to the OFF
position.
There are 14 fuel bed colour options:
Press “FUEL BED” button to select the colour of fuel bed or return to the
OFF position.
Note: The appliance will lose the memory for the light functions when
the switch is set to the Off Position or the remote runs out of power.
Heater Running Indicators
When the fan heater is used in conjunction with the flame or fuel bed effects
the heater running indicators will light up for 10 seconds.
The LEDs will illuminate for 10 seconds if the flame or fuel bed effect is On.
If the fan heater is used independently, the heater running indicators will
stay on.
Reset Button for Remote Control
If the handset loses signal or needs to be replaced then, see Servicing
Section for details.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Marlborough Electric ECO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Marlborough Electric ECO in the language / languages: English, Dutch, French, Italian, Norwegian as an attachment in your email.

The manual is 3.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info