713065
77
Zoom out
Zoom in
Previous page
1/100
Next page
77
NOTE
After plugging in, the internal clock is set to 12 o'clock (high noon, 12:00). You
need to adjust the clock only when timer operation is desired (see: ‘Using the
Timer’). No other function is influenced by the clock.
ADJUSTING THE AMOUNT, STRENGTH, AND TASTE OF YOUR COFFEE
There are various possible adjustments, you can use to adapt the strength and taste
of your coffee to your likings. The influence of these parameters is described in chap-
ter ‘Properties of Your New Coffee Machine Grind & Brew Pro’. Additionally, seve-
ral useful hints concerning these settings are given in chapter ‘Tips for Best Results’.
NOTE
The appliance always uses the complete amount of water within the water tank.
Therefore, you select the actual amount of brewed coffee via the filling level
within the water tank (see: ‘Preparing the Appliance for Operation’).
IMPORTANT - As long as the appliance is live without interruption, your settings
will be kept in memory. All your individual settings get lost when interrupting the
connection to the power supply and via power failure. In this case the parameters
are reset to factory values. However, there is no influence of the power supply on
the setting of the grind size, selected via the adjusting dial on top of the brewing
head. You should select medium settings for your first experiments.
Adjusting the Grinder
IMPORTANT - Ensure to switch off the grinder, when using pre-ground coffee pow-
der. Otherwise, the filter could be overfilled and your coffee gets too strong and/
or runs out at the rim of the filter (see: ‘Tips for Best Results’). Grinder operation
is necessary only when using whole coffee beans. In this case, the bean hopper
must be filled first with the appropriate amount of coffee beans (see: ‘Using Whole
Coffee Beans’).
CAUTIONDo not fill pre-ground coffee powder into the bean hopper!
Otherwise, the grinder could get blocked and damaged. Just as with other drip
coffee makers, coffee powder must be filled directly into the filter.
8. If you do not wish to use the grinder and filled pre-ground coffee powder into
the filter already, ensure to switch off the grinder by touching the grinder button.
With the grinder de-activated, the grinder button illuminates red. If you do not
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 42711 GRIND and BREW PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 42711 GRIND and BREW PRO in the language / languages: English, German as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info