713065
76
Zoom out
Zoom in
Previous page
1/100
Next page
76
2. Press the opening button (“OPEN”) at the right side of the housing and swivel
out the filter holder. Remove the splash shield. Ensure that the filter basket is in
place in the filter holder. Insert the re-usable filter into the filter basket and fold the
handle of the re-usable filter completely down. Alternatively, line the interior of
the filter basket via a paper filter bag size 4 (see: ‘Properties of Your New Cof-
fee Machine Grind & Brew Pro’). For this, fold in the seams of the filter bag first.
Then hold the filter holder with one hand for avoiding to push the filter holder
down, because this could case damage to the hinges. Spread out the filter bag
at the inner walls of the filter basket. If you wish to use pre-ground coffee pow-
der, this is the best moment for filling the desired amount of coffee power into
the filter bag. Do not fill in more than 10-12 level measuring spoonful (approx.
60 g). Otherwise, the filter basket could overflow during brewing. Do not forget
to de-activate the grinder by touching the grinder button. The grinder button must
be illuminated red.
IMPORTANT - Please, do not forget to de-activate the grinder, when using pre-
ground coffee powder!
CAUTION – If the filter holder cannot be inserted easily under the brewing
head, check whether the filter system is installed correctly. Do not use violence, but
clear away the obstacle (see: ‘Solving Problems’). When using a filter bag,
perhaps, you must push the splash shield gently down onto the filter bag.
Always empty the glass carafe completely, before starting the brewing cycle.
Otherwise the glass carafe could overflow with hot coffee running out.
3. Place the splash shield in the correct orientation on the filter basket. If the splash
shield does not lie stable on the filter basket, the splash shield must be turned over.
4. Turn the filter holder under the brewing head and slightly press the filter holder
into the front of the appliance until the filter holder engages securely under the
brewing head.
5. Empty the glass carafe completely and, if required, rinse the glass carafe with clear
water. Place the empty glass carafe onto the heating plate below the filter holder.
6. Insert the power plug into a suitable power outlet (see: ‘Important Safeguards for
Electrical Appliances’). The on/off button illuminates white.
7. Touch the on/off button to switch on the appliance. All buttons and the display
area illuminate. After connecting the appliance to the power supply, the factory
settings are active and shown on the display area. The appliance is ready for
operation now.
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 42711 GRIND and BREW PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 42711 GRIND and BREW PRO in the language / languages: English, German as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info