713065
79
Zoom out
Zoom in
Previous page
1/100
Next page
79
SETTING THE INTERNAL CLOCK
In the centre of the display area, the current time of the internal clock is shown. The
clock is operating in 24 hours mode.
NOTE
With manual operation, it is not essential to set the clock. However, if you wish
to use the timer, you must set the clock first. Otherwise, the starting time cannot be
determined correctly.
IMPORTANT - After any interruption of the power supply, the internal clock of
the appliance starts at 12:00 (high noon), when the appliance is connected to
the power supply again. However, as long as the appliance is connected to the
power supply, the clock will run on even after the automatic shut-off switches off
the operating panel (see: ‘Memory Function’ and ‘Keep Warm Function and Auto-
matic Shut-Off’).
12. For setting the internal clock simply touch the hour button and/or minutes button
until the correct time is shown. The displayed time flashes during setting. If you
do not touch the appropriate buttons again, the time will be displayed continu-
ously after approx. 2 seconds.
NOTE
When leaving your finger on the hours button or minutes button, the display runs
on automatically until you remove your finger.
USING THE TIMER
Via the timer, the brewing cycle can be started at a pre-selected starting time. Using
this feature, your Coffee Machine Grind & Brew Pro can wait for you with freshly
brewed coffee, whenever you like.
WARNINGWhen using the timer, the coffee maker starts operation auto-
matically at the pre-selected point in time without any supervision. Always ensu-
re that you have prepared the appliance for operation completely and correctly
according to the instructions given above, before activating timer operation!
Otherwise, hot water and hot coffee could run out and cause severe damage.
IMPORTANT - Before setting the starting time and activating the timer, you need
to set the internal clock of the appliance (see above: ‘Setting the Internal Clock’).
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 42711 GRIND and BREW PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 42711 GRIND and BREW PRO in the language / languages: English, German as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info