713065
80
Zoom out
Zoom in
Previous page
1/100
Next page
80
Setting the Starting Time
13. Hold the timer button touched, until the starting time flashes on the display area.
The default starting time after any interruption of the power supply is “0:00”.
14. Within 2 seconds after switching to the starting time, touch the hours button or
minutes button to set the starting time to the desired value. Each touch of a time
setting button (hour or minute) increments the assigned value by 1.
IMPORTANT - The starting time flashes for approx. 2 seconds on the display.
During this time period, you can adjust the starting time via the hour button and
minute button. When no button is touched within 2 seconds after the last entry,
the appliance toggles back to the internal clock, and the hour button and minute
button affect the setting of the internal clock only.
Activating the Timer
WARNING – Before activating the timer, always ensure that the appliance is
prepared for operation correctly and completely (see: ‘Preparing the Appliance for
Operation’). Otherwise, safe operation is not guaranteed.
IMPORTANT - For activating the timer, you need to adjust the internal clock and
starting time first (see: ‘Setting the Internal Clock’ and ‘Setting the Starting Time’).
The timer will be de-activated automatically, when the programmed brewing cycle
is started. If you wish to start the appliance 24 hours later via the timer, you need
to activate the timer again. Ensure that the desired starting time is still stored in the
memory of the appliance.
NOTE
After any type of interruption of the power supply, the starting time will be set to
the default factory setting (“0:00”). Adjust the starting time, before activating the
timer (see: ‘Setting the Starting Time’).
15. For checking the starting time of the timer, hold the timer button touched until the
starting time flashes on the display area. As long as the starting time flashes, you
can make corrections via the hour button and the minute button (see: ‘Setting the
Starting Time’).
16. When the starting time is set correctly, activate the timer via touching the timer
button shortly. The timer button illuminates red and the timer icon is shown on the
display area. The appliance will start operation automatically at the program-
med starting time with no further entry by the user.
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 42711 GRIND and BREW PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 42711 GRIND and BREW PRO in the language / languages: English, German as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info