713065

Gastroback 42711 GRIND and BREW PRO Manual

82
Zoom out
Zoom in
Previous page
1/100
Next page
82
IMPORTANT - After activating the timer, the brewing cycle is going to be started
automatically at the programmed starting time. You do not have to do anything
else (see: ‘Using the Timer’). With the timer activated, nevertheless you can start
the brewing cycle at once or de-activate the timer (see: ‘De-Activating the Timer’
and ‘Starting the Brewing Cycle Immediately’).
NOTE
To pour a cup of coffee, you may take out the glass carafe for a short time even
during operation. The drip-stop valve closes the filter basket to avoid dripping of cof-
fee, while the glass carafe is not in place. At the maximum after 15 seconds place
the glass carafe back onto the heating plate to avoid overflow of the filter basket.
CAUTION – The drip stop valve could get blocked by coffee powder. Thus,
when taking out the glass carafe, while the brewing head is still dripping, ensure that
the drip stop valve closes the outlet of the filter basket completely. Place the glass cara-
fe back onto the heating plate after max. 15 seconds. Otherwise, overflow could
occur and hot coffee could run onto the heating plate and under the appliance.
1. Prepare the appliance for operation as described above: assemble the filter sys-
tem (filter holder, filter basket, filter, and splash shield), fill the bean hopper or
filter, push the filter holder under the brewing head, fill the water tank, place the
empty glass carafe onto the heating plate, enter the desired settings (see: ‘Using
Whole Coffee Beans’ and ‘Preparing the Appliance for Operation’).
2. When timer operation is desired, ensure that the internal clock is set correctly
and adjust the starting time, before activating the timer (see: ‘Using the Timer’).
Alternatively, touch the on/off button to start the brewing cycle immediately. The on/
off button illuminates red during operation.
CANCELLING THE BREWING CYCLE
You can cancel any running function (brewing cycle, keep warm, or timer operation)
any time you like. For this, simply touch the red on/off button. The on/off button is
illuminated white again and the current operation stops immediately.
IMPORTANT - Please keep in mind that the brewing cycle cannot be continued
after cancelling the brewing cycle. However, you can start a new brewing cycle
immediately. With water still in the water tank, you can de-activate the grinder
via the grinder button, and thereafter start a new brewing cycle. The appliance
re-assumes operation using the remaining water.
… 82 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 42711 GRIND and BREW PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 42711 GRIND and BREW PRO in the language / languages: English, German as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info