Manual Gastroback 40983 (page 64 of 80) (English, German)

714651

Zoom out

Zoom in

1/80

Note

With the speed selector in position “M”, the motor operates only with the bar blender

or chopper lid mounted. Always insert the bar blender into your food, before starting

the motor. Always switch off the motor (speed selector position “0”), before removing

the bar blender from your food or inserting any foreign objects into the mixing contai-

ner. This will prevent food and liquids from being hurled about. With solid pieces of

food, you may move the bar blender carefully up and down a little within your food.

When doing so, ensure that the food will not be hurled about, run out, or splashes.

Avoid over-processing your food. The bar blender will process your food within

seconds. Using the blender container is not mandatory for processing via the bar

blender. You may use other mixing containers (see: ‘Tips for Best Results’).

CAUTION: To prevent the motor from overheating, do not operate the appli-

ance for more than 1 minute at a time. Allow the motor unit to cool down to room

temperature before using it again.

Note

Speed selection is not possible with the bar blender, because high speed rotation

is crucial for the functioning of the bar blender. The speed selector must be set to

“M” always.

4. Ensure that the bar blender is inserted firmly at the motor unit (see above). Fill

your food into the blender container.

5. Provide a sufficiently large bowl or container, filled with some warm dishwater.

The dishwater should be able to cover the bell-shaped end of the bar blender.

6. Ensure that the speed selector is set to “0”. Connect the motor unit to a suitable

wall power outlet.

7. Holding the motor unit by the handle, place the bell-shaped end of the bar blen-

der into your food. With runny food, the bar blender should touch the bottom of

the blender container.

8. To avoid that the blender container is hurled about when switching on the appliance,

grasp the blender container with one hand. Then slide the speed selector to “M”.

Important: Ensure to hold the bar blender straight upright and avoid tilting

the bar blender during operation. Otherwise, solid parts and liquids of your

food could be hurled out of your mixing container. When moving the bar blender

during operation, carefully ensure that the end of the bar blender will not come up

too far to avoid splashing.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40983 in the language / languages: English, German as an attachment in your email.

The manual is 0,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gastroback 40983 Manual

Product: