714651

Gastroback 40983 Manual

62
Zoom out
Zoom in
Previous page
1/80
Next page
62
11. If required, stop operation (speed selector to “0”) in time, for scraping your food
down from wire tools and at the sides of the mixing container. For this, you may
use a plastic or rubber spatula. Thereafter continue mixing. Do not scrape off
food sticking to the inner walls of the mixing container via the spinning wire tools
to avoid damage.
12. After mixing, slide the speed selector to “0” (off) and wait until the wire tools
come to a complete standstill.
13. Take the wire tools out of your food. If required, scrape down food, still sticking
to the wire tools. Then immerse the wire tool in the provided dishwater.
14. Leave the motor operate for some seconds to remove any residues of food.
15. Slide the speed selector to “0” (off) and wait until the wire tools come to a com-
plete standstill. Unplug the motor unit.
Removing the Wire Tools
CAUTION: Do not attempt to remove the wire tools by pulling them out of
the tool couplings with violence! Always set the speed selector to “0”(off) and
unplug the appliance before removing the wire tools. When pressing the Ejection
button, the wire tools will fall out. Ensure that the wire tools will not fall down.
16. Ensure that the appliance is switched OFF (speed selector to “0”) and unplugged.
17. Hold the wire tools with one hand or hold them at a short distance over a con-
tainer or sink. Press the Ejection button for releasing the tool lock and for making
the wire tools fall out of the tool couplings.
18. Clean the appliance after each use to avoid that residues of food dry on the
surfaces.
USING THE BAR BLENDER
WARNING: The blades of the bar blender are very sharp. DO NOT grasp
into the bell-shaped end holding the blades to avoid severe injuries. Always
ensure to keep your hands and any foreign objects (e.g. clothes, towels,
cooking utensils) away from the blades of the bar blender, when the bar blen-
der is installed at the motor unit to avoid severe injuries and damage. Before
switching on the motor, always insert the blades of the bar blender into your food.
The bell-shaped end should be covered with food.
… 62 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40983 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40983 in the language / languages: English, German as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info