714651
60
Zoom out
Zoom in
Previous page
1/80
Next page
60
PROCESSING VIA THE WIRE TOOLS
CAUTION: Always ensure that the speed selector is set to the “0” (Off) posi-
tion and the appliance is unplugged, before attaching or removing any accesso-
ries. Do not connect the appliance to the power supply, before the wire tools
(beaters, dough hooks, whisk) have been installed securely and will not fall out.
When using a pair of wire tools (beaters or dough hooks), it is crucial to install a
matched pair. Do not mix up the wire tools.
Installing the Wire Tools
1. Ensure that the motor unit is unplugged from the power supply. Ensure that the
speed selector is set to the “0” (Off) position. Ensure that the upper shaft ends of
the wire tools are dry and clean.
Note
The drives of the tool couplings rotate in opposite directions. Because of this, the
wire tools dedicated for usage in pairs are designed mirror-image. For avoiding
wrong installation, at the shaft of one of the wire tools a disc-shaped collar ensures
that this tool will fit only in the tool coupling with the wide opening. Only one of a
pair of beaters or dough hooks has a collar on the shaft; the other one is without
that collar. The whisk must be used separately and will fit in both tool couplings.
2. When inserting a pair of beaters or dough hooks, the beater or dough hook
with the disc-shaped collar must be placed in the tool coupling with the wide
opening. Push the shaft end into the appropriate tool coupling and slightly turn
the shaft, while pushing the wire tool into the opening, until the wire tool clicks
into place.
3. Check, if the wire tools are engaged securely and correctly and will not fall out.
Operating the Wire Tools
CAUTION: To prevent the motor unit from overheating, do not operate the
motor continuously for more than 10 minutes. Allow the appliance to cool down
to room temperature before using it again. Do not use the chopper container with
any of the wire tools, to avoid damage to the appliance and its accessories!
Always insert the wire tools into the used mixing container with your food, before
operation. Always switch OFF and remove the accessory from the mixing container
before adding ingredients and before taking out your food. Otherwise, splashes and
small particles could be hurled about.
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40983 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40983 in the language / languages: English, German as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info