Manual Gastroback 40983 (page 65 of 80) (English, German)

714651

Zoom out

Zoom in

1/80

9. Press the “Pulse” button to start the motor. The motor will agitate only with the

“Pulse” button pressed and stop as soon as the “Pulse” button is released.

10. Without tilting the bar blender, you may slowly and carefully move the bar

blender up and down a little within the blender container.

11. As soon as your food reached the desired consistency, release the “Pulse” button

and wait until the motor stops completely.

12. Immerse the bar blender into the provided warm dishwater. Ensure to make

the bar blender touch the bottom of the container. Then hold the “Pulse” button

pressed for some seconds to remove residues of food from the blades of the bar

blender. Release the “Pulse” button, slide the speed selector to position “0”, and

unplug the appliance.

13. Remove the bar blender immediately after use (see below).

Removing the Bar Blender

WARNING: Always set the speed selector to “0” (off) and unplug the motor unit,

before removing the bar blender. Do not attempt to release the bar blender during

operation. Do not grasp into the bell-shaped end of the bar blender when handling

the bar blender to avoid injuries. Always grasp the bar blender by the shaft.

14. Ensure that the speed selector is switched to position “0” (off), and the motor unit

is unplugged.

15. Grasp the bar blender by the shaft and turn the bar blender counter-clockwise

to the stop. Then pull the bar blender out of the drive compartment. The shutter

will close automatically.

16. Clean all used accessories immediately after use (see: ‘Care and Cleaning’).

USING THE CHOPPER SYSTEM

WARNING: The blades of the chopper knife are very sharp. Do not touch the

blades to avoid injuries. Only touch the chopper knife at the upper part of the

shaft. For your safety, the chopper knife cannot be driven by the motor unit direct-

ly, but only via the chopper lid. Additionally, the chopper knife will fall off the

chopper lid, if the chopper lid is lifted from the chopper container. Thus, it is almost

impossible to operate the chopper system with any of the accompanying parts

missing. Do not attempt to corrupt this safety feature via using any type of foreign

containers. Do not attempt to operate the chopper system with any of its parts

damaged in any way. Before switching on the motor unit, always ensure that the

chopper system is installed completely and correctly.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40983 in the language / languages: English, German as an attachment in your email.

The manual is 0,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gastroback 40983 Manual

Product: