Manual Gastroback 40983 (page 66 of 80) (English, German)

714651

Zoom out

Zoom in

1/80

CAUTION: Do not remove the motor unit from the chopper lid during operation

to avoid damage to the drive wheel and coupling. If the motor slows down notice-

ably during operation or stalls, immediately switch OFF the appliance (release the

“Pulse” button, slide the speed selector to “0”). See: ‘Solving Problems’.

Ensure that the drive coupling of the chopper lid is completely clean and dry, before

assembling the motor unit at the chopper system to avoid pollution and damage to

the drive wheel of the motor unit. Additionally, you should keep the drive coupling

of the chopper knife and chopper lid clean and dry, when assembling the chopper

system to allow proper functioning.

Assembling the Chopper System

Important: Do not overfill the chopper container to avoid overflow. The chopper

system is not suited for processing liquids (see: ‘Tips for Best Results’).

Note

The top of the chopper lid is shaped to fit into the drive wheel at the rear end of

the motor unit. The drive wheel is protected by an automatically closing shutter.

Before attaching the chopper system to the motor unit, you must open the shutter.

1. Hold the chopper knife by the upper end of the shaft and insert the chopper knife

into the chopper container.

Tip: While filling the chopper container, you may protect the upper shaft end of the

chopper knife via a small beaker or small glass to avoid that food and liquids will

get on the drive coupling of the shaft. Do not forget to remove this item, after filling.

2. Fill the prepared food into the chopper container. Observe the maximum filling

level (MAX) to avoid overflow and ensure a suitable processing result. Ensure

that the coupling at the upper part of the chopper knife is clean.

3. Cover the chopper container with the chopper lid. Turn the chopper lid clock-

wise to the stop for locking the chopper lid on the chopper container.

4. Grasp the chopper system by the handle. It is best to open the shutter of the

drive compartment via the chopper lid. For this, place the motor unit in an upright

position onto the chopper lid and gently slide the motor unit over the top of the

chopper lid to open the shutter. With the shutter open, the motor unit will settle

down on the chopper lid coupling to a stable position.

5. Turn the motor unit by 90° to the lock the motor unit tangibly. The appliance is

ready for operation, if the motor unit is locked securely in place.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40983 in the language / languages: English, German as an attachment in your email.

The manual is 0,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gastroback 40983 Manual

Product: