714630
115
Zoom out
Zoom in
Previous page
1/132
Next page
115
Problem Reason The Solution
The display is illu-
minated, showing a
speed selection, but
the motor does not
respond.
The processing sys-
tem is not installed
correctly. For your
safety, the safety
interlocks prevent
operation.
Ensure to install the processing system completely and correctly
(see: ‘Assembling the Juicing System’ or ‘Assembling the Glass
Jugs’).
Optional accessories: in most cases the thread between blade
assembly and glass container is not screwed on sufficiently
tight, or the system is not locked correctly to the motor base.
Perhaps, the sealing ring is missing.
The overheat protec-
tion device has been
triggered.
Turn the selection dial to “OFF”, switch off at the power switch,
and unplug the appliance (see: ‘Self-Resetting Overheat Protec-
tion Device’). Leave the appliance cool down for at least 1/2
hour. Do not let the appliance operate continuously for a too
long time (see: ‘Method of Operation and Making Breaks’).
The motor has been
stalled for more
than 10 seconds.
The overload protec-
tion has been trig-
gered.
Turn the selection dial to “OFF”, switch off at the power switch,
and unplug the appliance. Remove the obstacle. Thereafter, you
may start operation again.
The automatic shut-
off has been trig-
gered.
After leaving the appliance in operational mode for more then
20 minutes, the automatic shut-off is activated. Simply turn the
selection dial to another speed selection to re-activate the appli-
ance (see: ‘Automatic Shut-Off’).
From the start on,
the motor seems to
run with an uneven
speed.
This may appear
during operation.
Depending on the load that is straining the motor, regularly
make breaks every 7-20 minutes to avoid overheating (see:
‘Method of Operation and Making Breaks’).
The appliance is
operated on heavy
load.
With a large amount of hard, glutinous, or fibrous food and/
or large, hard pieces of food, the motor is strained with hea-
vy load. After max. 7 minutes of continuous operation, make
a break of 20 minutes to avoid overheating (see: ‘Method of
Operation and Making Breaks’).
115


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40152 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40152 in the language / languages: English, German as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info