714630
117
Zoom out
Zoom in
Previous page
1/132
Next page
117
JUICING SYSTEM
Problem Reason The Solution
The juice collector
does not fit onto the
motor base.
The pulp container is
not placed correctly
at the side of the
motor base.
Place the pulp container onto the pulp container protrusion at
the bottom of the motor base. If positioned correctly, it will fit
closely to the side of the motor base.
Wrong orientation of
the juice collector.
The juice spout of the juice collector must fit into the groove
at the motor base and the pulp guttering must fit into the pulp
container. Position the juice collector accordingly.
The juicing sieve or
any other accessory
is still mounted on
the drive rotor.
Remove any accessories from the drive rotor. The juice collector
is always mounted BEFORE inserting the juicing sieve.
You cannot close
the gap between
juice collector and
juicer cover.
The juicing sieve is
not engaged at the
drive rotor.
Remove the juicer cover. Turn the juicing sieve without pressure
over the drive rotor until the juicing sieve slides down easily.
Then push down the juicing sieve slightly to make it engage
tangibly on the drive rotor.
The pulp container is
not positioned cor-
rectly.
Place the pulp container on the protrusion at the bottom of the
motor base. Otherwise, the pulp spout of the juicer cover cannot
slide into the pulp container.
You cannot fix the
locking arm in its
upper locked posi-
tion.
The juice collector
or juicer cover is not
mounted correctly.
Ensure that the juice collector and juice cover are mounted tight-
ly and without any gaps.
The juicing sieve is
not locked to the
drive rotor correctly.
Remove the juicer cover and turn the juicing sieve to and fro on
the drive rotor until it slides down. Then push the juicing sieve
down gently. It must engage tangibly on the drive rotor. The-
reafter mount the juicer cover again. There may be no gap bet-
ween juicer cover and juice collector. Try again.
117


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40152 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40152 in the language / languages: English, German as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info