714630
116
Zoom out
Zoom in
Previous page
1/132
Next page
116
Problem Reason The Solution
The motor base gets
unexpectedly hot
during operation.
The power cord is
still wound partly
around the cord
storage during ope-
ration.
Always unwind the power cord completely before operation to
avoid overheating (see: ‘Before First Use’).
The motor is already
running continuously
for a too long time.
Do not let the appliance operate continuously for more than 20
minutes. With heavy load, make a break after each 7 minutes
(see: ‘Method of Operation and Making Breaks’). If required,
process your food in portions.
Malfunction has
occurred.
Immediately unplug the appliance. Get in contact with an autho-
rised service centre for examination and repair.
The motor stops
unexpectedly during
operation.
Too much too hard
or fibrous food in
the processing sys-
tem is blocking the
knives.
Immediately switch off (selection dial to “OFF”, power switch
to “O”) and unplug (see: ‘Electronic Overload Protection’).
Remove the obstacle (see: ‘Emptying the Containers and Remo-
ving Obstacles’ or ‘Removing Obstacles from the Glass Jugs’).
Thereafter, try again.
The overheat protec-
tion device has been
triggered.
Immediately switch off (selection dial to “OFF”, power switch
to “O”) and unplug. Leave the appliance cool down for at least
30 minutes (see: ‘Self-Resetting Overheat Protection Device’).
Thereafter, try again.
The electronic over-
load protection has
been triggered.
Immediately switch off (selection dial to “OFF”, power switch
to “O”) and unplug (see: ‘Electronic Overload Protection’).
Remove the obstacle (see: ‘Emptying the Containers and Remo-
ving Obstacles’ and ‘Removing Obstacles from the Glass Jugs’).
Thereafter, try again.
After leaving the
appliance operate
for more then 20
minutes, the auto-
matic shut-off has
been triggered.
Simply turn the selection dial to another speed selection to re-
activate the appliance (see: ‘Automatic Shut-Off’). However,
you should make a break of at least 20 minutes: switch “OFF”
the appliance completely (at the selection dial and power
switch). Then unplug the appliance and wait for the appliance
to cool down.
116


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40152 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40152 in the language / languages: English, German as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info