714630
113
Zoom out
Zoom in
Previous page
1/132
Next page
113
Note
If the motor does not start, when selecting a speed level, check whether the con-
nections of the blade assembly to the grinding cup and the motor base are suffi-
ciently tight. Always switch off the appliance, before checking the connections.
10. Switch the power switch at the rear of the motor base to the ON position
(“I”). Then, turn the selection dial to the desired speed level (see: ‘Tips for Best
Results’). The motor should start agitating at once. If not, see: ‘Solving Problems’.
11. After grinding is done, turn the selection dial to the “OFF” position, switch off
the appliance at the power switch, and unplug. Then disassemble the appliance
(see: ‘Disassembling the Appliance after Grinding’) for getting out your food.
Important: Do not leave the appliance unattended when it is connected to the
power supply.
Disassembling the Grinding System
12. Ensure that the selection dial is turned to “OFF” and the power switch is switched
off (“O”). Unplug the appliance.
CAUTION: Do not turn the processing system by the grinding cup. Always
grasp the blade assembly. Otherwise, the connection of the grinding cup and
blade assembly cold get loose and your food will fall out.
Do not strike the grinding cup against any hard or sharp-edged object for loo-
sening the food from the blade assembly. However, you may hit the grinding cup
slightly against your palm.
13. Grasp the blade assembly by the collar and turn it counter-clockwise to unscrew
it from the motor base. Then lift the grinding system from the motor base.
14. Hold the grinding system with the blade assembly facing upwards and hit the
grinding cup slightly with your palm or shake the powder from the blade assem-
bly into the grinding cup.
Tip: For keeping your workspace clean, we recommend to open the grinding sys-
tem over a large dish.
15. Turn the blade assembly counter-clockwise for removing the blade assembly.
16. Remove your food. If you do not wish to process another portion, clean the used
parts (see: ‘Care and Cleaning’).
113


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40152 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40152 in the language / languages: English, German as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info