714630
112
Zoom out
Zoom in
Previous page
1/132
Next page
112
system to and fro until it settles down easily on the drive rotor, coming to a sta-
ble stand on the motor base.
Important: When mounting or dismounting the grinding system onto the motor
base, do not grasp the grinding cup. Always clasp the collar of the blade assem-
bly with both hands to avoid damage to the thread connecting the grinding
cup and blade assembly. Otherwise, the connection could get over-tightened,
making it extremely difficulty to remove the blade assembly after grinding.
8. For fixing the grinding system to the motor base, grasp the blade assembly with
both hands by the collar and turn it clockwise to the stop. This is a little more
than a finger's breadth after feeling the first resistance. The grinding system is
now ready for operation.
CAUTION: Please keep in mind that the motor will start operation immediate-
ly, when connecting the appliance to the power supply, while the power switch
and selection dial are in operating position. Thus, always switch off the appli-
ance, at the selection dial and power switch, before plugging in the power
plug.
9. Ensure that the selection dial is in the “OFF” position and the power switch in the
“O” position. Then insert the power plug into an appropriate wall power outlet
.
Important: If the rotating speed slows down continuously during operation or the
motor stalls, there may be too much food in the grinding cup, and/or there are
too many too hard ingredients blocking the knives. Switch off the appliance at
the selection dial and power switch and unplug. Remove the grinding system from
the motor base. Then remove any obstacles. If required, take out some food and
process your food in smaller portions.
Tip: For loosening the ingredients from the knives or the inner walls of the grinding
cup, it may be sufficient to shake the grinding cup or hit the grinding cup slightly
against your palm. For this, always remove the grinding cup from the motor base.
However, do not strike the grinding cup against any hard or sharp-edged
objects! Depending on the desired result, you may try to operate the motor in
pulses by turning the selection dial slowly to and fro several times.
Note
The appliance will process your food in some seconds. It is better to intermedia-
tely check the consistency of your food (after processing for a few seconds) than
to over-process your food.
112


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40152 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40152 in the language / languages: English, German as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info