714630
101
Zoom out
Zoom in
Previous page
1/132
Next page
101
Note
If the motor does not start, when switching on and selecting a speed level, probab-
ly the safety interlocks are not engaged. These features of the appliance ensure
that the processing system is locked firmly to the motor base and probably leak-
free, thus protecting you from harm and damage. Check, if the threads are scre-
wed on sufficiently tight (see: ‘Solving Problems’).
ASSEMBLING THE GRINDING SYSTEM (OPTIONAL GRINDING
SYSTEM)
In any case, the grinding system must be filled, before assembling the grinding
blades. The grinding cup will be closed air-tight, after screwing on the grinding
blades (see: ‘Operation / Grinding Dry Food’).
OPERATION
WARNING: Always ensure that the appliance and all its parts and accesso-
ries are out of reach of young children. Handle the juicing sieve and blade
assemblies (optional accessories) with special care, because the integrated knives
are very sharp.
Optional accessories: The glass containers are fragile. Always handle with care.
Do not fill in any hot food or liquids! Even small splinters and shards could cau-
se severe injuries, when getting into your food. Thus, before using the optional
accessories, always ensure that the glass parts are completely undamaged. There
may be no cracks, or chipped edges.
Switch off completely (selection dial to “OFF”, power switch to “O”), wait until the
motor stops, and unplug the appliance, before assembling or disassembling any
parts, and when the appliance is not in use. Do not leave the motor base unat-
tended, while it is connected to the power supply. Do not overfill the containers of
the processing systems (pulp container, juice jug, glass jugs, grinding cup) to avo-
id overflow. During juicing, ensure that the juices will run into the juice jug without
obstacles. Otherwise, the juice could run on or under the motor base due to overflow
of the juice collector.
If any liquids run out during operation or are accumulating under the motor base,
immediately unplug the appliance and carefully remove the processing system from
the motor base. Then clean and dry the motor base (see: ‘Care and Cleaning’).
Leave the motor base dry naturally for at least 1 day. Use some water for checking
the used processing system for leakage (see: ‘Solving Problems’).
101


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40152 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40152 in the language / languages: English, German as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info