714630
100
Zoom out
Zoom in
Previous page
1/132
Next page
100
Note
We recommend using the designated juice jug, because some juices may froth
and splash at the juice spout. In any case, by covering the juice jug with the
appropriate lid, you avoid that splashes will escape from the juice spout.
Tip: For juicing, you may place any sufficiently large jug, drinking glass or mug
under the juice spout. In this case, keep in mind that splashing could occur and
juices could run down at the exterior of the used vessel.
ASSEMBLING THE GLASS JUGS (OPTIONAL MIXING OR MINCING
SYSTEM)
WARNING: Always ensure that the glass jugs (mixing or mincing jug) are
undamaged, before assembling the system. Splinters of glass could cause severe
injuries and damage. Additionally, chipped edges or any dried on food at the
thread and/or sealing area of the processing container could cause leakage and
damage the blade assembly or sealing ring.
CAUTION: Ensure not to tilt the thread when screwing on the blade assembly.
Otherwise, the thread could get damaged and your food will run out. Do not over-
tighten the thread. If in doubt, check the seal by pouring some water into the glass
jug.
1. Select the required blade assembly and glass jug for blending, chopping, or
mincing (see: ‘Selecting the Optimum Processing System’ and ‘Tips for Best
Results’).
2. Check, whether the glass jug, sealing ring, and blade assembly are completely
undamaged. Additionally, for getting a leak-free seal, the sealing surfaces must
be completely clean.
3. With the smooth side facing downwards, place the sealing ring into the blade
assembly. Ensure to insert the sealing ring into the appropriate groove at the
inner rim of the blade assembly.
4. Screw the blade assembly onto the glass jug by turning the blade assembly
clockwise. The connection must be tight and leak-free.
5. Pour some water into the glass jug for checking, if the seal is leak-free.
100


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40152 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40152 in the language / languages: English, German as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info