714630
99
Zoom out
Zoom in
Previous page
1/132
Next page
99
Note
When combining the various glass containers and blade assemblies, keep in mind
that the best results will be achieved in most cases, when using the glass contai-
ners with the dedicated blade assembly. In some cases, adapting the processing
time or speed level may be adequate too. Additionally, you may try operation in
pulses.
ASSEMBLING THE JUICING SYSTEM
1. Place the pulp container tightly against the left side of the motor base. The pulp
container protrusion at the baseplate of the motor base must slide completely into
the groove at the bottom of the pulp container.
Important: Ensure that the exterior of the juice collector is clean and dry, before
mounting it on the motor base to avoid that residues of food and liquids get into
the motor base and/or clog the safety interlocks.
2. Place the juice collector on the motor base with the juice spout facing to the
locking arm. Make the juice spout slide into the spout groove and the pulp gut-
tering into the pulp container. Ensure that the drip-stop of the juice spout is turned
to the open position: the dark bar at the stainless steel sleeve of the juice spout
will be facing towards you.
CAUTION: The knives of the juicing sieve are very sharp. Hold the juicing
sieve at the rim.
3. Insert the juicing sieve into the centre of the juice collector and press it down
without violence to lock it to the drive rotor. If required, turn the juicing sieve to
and fro to achieve the correct orientation before pressing it down.
4. With the pulp spout sliding into the pulp container, place the juicer cover onto
the juice collector and press it down slightly without violence until it settles firmly
on the juice collector. There may be no gap between the juicer cover and the
juice collector.
5. Carefully lift the locking arm up to the vertical closed position by pushing the
locking arm onto the support on the juicer cover until it tangibly engages. If atta-
ched correctly, the locking arm will be fixed in this position.
6. Place the juice jug under the juice spout. Then cover the juice jug with the desi-
gnated lid. The appliance is now ready for juicing.
99


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40152 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40152 in the language / languages: English, German as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info