583758
28
Zoom out
Zoom in
Previous page
1/106
Next page
20 GPSMAP 2106/2110 Owner’s Manual
BASIC OPERATION > NAVIGATING TO A DESTINATION
To Go To a point:
1. Press NAV.
2. Highlight Go To Point, and press ENTER. The Find From Current Position
Page opens.
3. Highlight Waypoints, and press ENTER. (You can also choose to go to
other points from this list, such as cities or Tide Stations.)
4. Select a waypoint, and press ENTER to open the Review Waypoint Page
for the selected waypoint.
5. Press the Go To soft key to begin navigation. A magenta line appears on
the map display showing the course from your present location to the
Go To point.
To stop navigation:
1. Press NAV.
2. Highlight Stop Navigation, and press ENTER.
Selecting a Map Item Go To Destination
A Go To can be used to select one of three items from the map display—an
existing waypoint, on-screen map items such as rivers, cities, navaids, or
a new map point. If you select a map item as the Go To destination, the
GPSMAP 2106/2110 automatically uses the name of the map item, but the point
is not stored in the waypoint list. If you select a new map point (non-map item) as
the Go To destination, the GPSMAP 2106/2110 automatically creates a waypoint
named MAP at the pointer location.
To Go To an existing waypoint or map item from the map display:
1. Use the ROCKER to highlight the waypoint or map item to which you want
to navigate on the Map Page, and press NAV.
2. On the Navigation menu, highlight Go To <waypoint name>, and press
ENTER.
To Go To a new map point (non-map item) from the map display:
1. Use the ROCKER to move the pointer to the location you want to go to,
and press NAV.
2. With Go To MAP Point highlighted, press ENTER.
To stop navigation:
1. Press NAV.
2. Highlight Stop Navigation, and press ENTER.
Follow Track and TracBack Navigation
A track is an electronic breadcrumb trail recording or history of your path. The
track currently being recorded is the “active” track. An active track can be stored
or saved in the unit. Both the Follow Track and TracBack options navigate in
the same way. Follow Track uses stored or “saved” tracks; TracBack uses your
current or “active” track.
28


Need help? Post your question in this forum.

Forumrules
1

Forum

garmin-gpsmap-2110

Reset search

  • I have acquired a Garmin 2110 with a GPS17.
    The cable between the two has been carefully cut - I assume to remove it from the previous vessel. I have connected all the cables together as per the Basic Installation shown in the handbook. All works fine.
    My question is how can i reconnect the two (front and rear) looms together. The wires from the GPS17 are too fine to solder and not of sufficient size as to allow connection by electrical Mobloc.
    Can anyone help me by telling me what they have used to connect these looms together?
    Thanks in anticipation
    Ian Hutchinson Submitted on 15-4-2021 at 11:46

    Reply Report abuse
  • I have just acquired a Garmin 2110 and GPS17.
    The wires that connect the two together have been carefully cut - I assume to enable the units to be removed from the previous vessel. I have connected all the wiring together as per the Basic Wiring diagram and all worked perfectly.
    However the wires from the GPS17 are extreamly delicate and will not (maybe my inexperience ) allow solder connections in order to make the installation complete. My question is what can I use to make a permanent fixing of the two (front and rear) looms?
    I have tried using a small mobloc but the wires in the GPS17 loom are too fine to make a good connection.
    Any help would be greatly appreciated
    Ian Hutchinson Submitted on 15-4-2021 at 11:25

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 2110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 2110 in the language / languages: English as an attachment in your email.

The manual is 6,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info