583758

Garmin GPSMAP 2110 Manual

10
Zoom out
Zoom in
Previous page
1/106
Next page
2 GPSMAP 2106/2110 Owner’s Manual
GETTING STARTED > USING THE GPSMAP 2106/2110 KEYPAD
Using the GPSMAP 2106/2110 Keypad



















�
�
�
�
�

POWER/BACKLIGHT Key
• Press and hold to turn the unit on or off.
• Press and release to adjust backlighting.
QUIT Key
• Press to cancel data entry or exit a page.
ENTER/MARK Key
• Press and release to enter highlighted items
and data or confirm on-screen messages.
• Press and hold to mark your current location
as a waypoint.
ZOOM Keys
• Press to zoom in or out on the map.
ROCKER Key
• Press up, down, right, or left to move
through lists, highlight fields, enter data, or
move the map pointer.
NAV/MOB Key
• Press to open the Navigation menu.
• Press and hold to mark a MOB waypoint
and create a track back to the marked
location.
PAGE Key
• Press to cycle through the main pages in
sequence.
• Press to end an operation in progress and
return to the main page.
DATA/CNFG Key
• Press to toggle the display of a main page
with or without function windows and data
fields.
• Press and hold to open the Configuration
window.
ADJ/MENU Key
• Press and release to view options for a page.
• Press and hold to open the Main Menu.
FIND Key
• Press to search for points, such as user
waypoints, cities, and services.
… 10 …


Need help? Post your question in this forum.

Forumrules
1

Forum

garmin-gpsmap-2110

Reset search

  • I have acquired a Garmin 2110 with a GPS17.
    The cable between the two has been carefully cut - I assume to remove it from the previous vessel. I have connected all the cables together as per the Basic Installation shown in the handbook. All works fine.
    My question is how can i reconnect the two (front and rear) looms together. The wires from the GPS17 are too fine to solder and not of sufficient size as to allow connection by electrical Mobloc.
    Can anyone help me by telling me what they have used to connect these looms together?
    Thanks in anticipation
    Ian Hutchinson Submitted on 15-4-2021 at 11:46

    Reply Report abuse

  • I have just acquired a Garmin 2110 and GPS17.
    The wires that connect the two together have been carefully cut - I assume to enable the units to be removed from the previous vessel. I have connected all the wiring together as per the Basic Wiring diagram and all worked perfectly.
    However the wires from the GPS17 are extreamly delicate and will not (maybe my inexperience ) allow solder connections in order to make the installation complete. My question is what can I use to make a permanent fixing of the two (front and rear) looms?
    I have tried using a small mobloc but the wires in the GPS17 loom are too fine to make a good connection.
    Any help would be greatly appreciated
    Ian Hutchinson Submitted on 15-4-2021 at 11:25

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 2110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 2110 in the language / languages: English as an attachment in your email.

The manual is 6,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info