782039
24
Zoom out
Zoom in
Previous page
1/53
Next page
m DANGER
The manufacturer of this equipment shall be not liable to the applicable
Product Liability Act for damages arising in this device or this unit at:
Installation and replacement of non-original spare parts,
Removal or alteration of safety components.
5.7 Operating instructions
m Important notices
1) Turn off the motor if the saw comes in contact with foreign objects. Check the
saw and, if applicable, repair it.
2) Protect the chain from dirt and sand. Even small quantities of dirt can quickly
make the chain blunt and increase the risk of kickback.
3) Start by cutting up smaller logs to practise in order to get a feel for the device,
before attempting difcult tasks.
4) Activate the throttle at maximum, before starting sawing.
5) Press the casing of the chainsaw against the log when starting sawing.
6) Run the device at full throttle throughout the whole sawing process.
7) Let the saw do the work. Only use slight downwards pressure.
8) Release the throttle as soon as you have nished your work so the motor runs
idle. If you let the machine run at full throttle without load, there will be
unnecessary wear and tear.
9) So that you do not lose control of the device after the chain exits the wood,
you should not apply any pressure to the saw towards the end of the cut.
10) Turn off the device before putting it down.
11) Check after starting the idle setting. The cutting blade must be stationary
during idling.
Felling trees - only with relevant training
m CAUTION
Watch out for broken or dead branches which may fall down during sawing and
which could cause severe injuries. Do not saw close to buildings or power lines if
you do not know in which direction the felled tree will fall. Do not work at night
because you can see less well, or during rain, snow and storms because the
direction in which the tree will fall cannot be anticipated.
Plan your work with the chainsaw in advance.
28 AFTER SALES SUPPORT
aldi.service.uk@scheppach.com 00800 4003 4003
MODEL: CSP41 PRODUCT CODE: 64055 04/2017
Safety regulations Petrol chainsaw 41cc
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline CSP41 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline CSP41 in the language / languages: English as an attachment in your email.

The manual is 6.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info