782039
22
Zoom out
Zoom in
Previous page
1/53
Next page
Kickback is the consequence of incorrect or erratic use of the machine. It can be
prevented by appropriate safety measures such as described below:
Hold the saw with both hands, ensuring thumbs and ngers clasp the
handles of the chainsaw. Position your body and arms in such a way that
you can withstand kickback forces. If appropriate measures are taken, the
operator can control kickback forces. Never let go of the chainsaw.
Avoid an abnormal body posture and do not saw above shoulder height.
This prevents accidental contact with the tip of the guide bar and it enables
better control of the chainsaw in unexpected situations.
Always use replacement guide bars and saw-chains specied by the
manufacturer. Incorrect replacement guide bars and saw-chains can cause
breaking of the chain and/or kickback.
Follow the manufacturer‘s instructions concerning sharpening and
maintenance of the saw-chain. Over-reduction of depth limiters increases
kickback tendency.
m WARNING
Beware of the following:
Rotary recoil (Fig. 28)
A = Recoil distance / B = Recoil reaction zone
Impact/Jamming recoil and pulling reactions (Fig. 29)
A = Pull / B = Solid objects / C = Push
To prevent pulling reactions, place the wood you wish to cut against the claw
stop. Use the claw stop as a pivot point during cutting.
5.6 Safety notices for maintenance / storage
Have your machine repaired by qualied specialists and only with original spare
parts. This ensures the safety of the machine.
1. Before use, always visually check the tool for wear and tear or damage. Replace
worn or damaged components and bolts. Tighten all nuts, bolts and machine
screws to ensure that the equipment is in a safe operating condition.
2. Regularly check the fuel system for leakage or signs of abrasion, for example
from porous fuel lines, loose or missing clamps and damage to the tank or the
tank lid. All faults must be resolved before use.
26 AFTER SALES SUPPORT
aldi.service.uk@scheppach.com 00800 4003 4003
MODEL: CSP41 PRODUCT CODE: 64055 04/2017
Safety regulations Petrol chainsaw 41cc
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline CSP41 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline CSP41 in the language / languages: English as an attachment in your email.

The manual is 6.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info