699093

Gallagher MR2500 Manual

6
Zoom out
Zoom in
Previous page
1/56
Next page
6
A
B
C
D
Understanding Your Remote Capable Energizer
A. Remote Control Codes
B. Remote Control Disable
C. Remote Control Electrical
Interference
D. Full Power/Low Power
Important!
Turn Energizer off before changing
switch settings. After changing
switch settings, it is recommended
that the switch cover is replaced (to
prevent insects entering).
How to Use Your Remote Control
Your Remote Control switches the Energizer ON or OFF from anywhere the fence is powered.
1. For an All Live Wire system: push the earth stake into the ground (for an Earth Wire Return system: place the
earth stake on the earth wire). For reliable performance it is IMPORTANT to achieve a good earth.
2. Place the brass terminal on the live fence wire.
3. The Remote will indicate Energizer pulses by regular, short fl ashes of the LED.
4. Push the button to switch the Energizer ON (Normal Operation) or OFF (Standby).
Your Remote LED gives a long fl ash (0.8 of a second) to indicate the signal has been transmitted.
Energizer Standby Mode
The Energizer indicates that it is in Standby mode by displaying a solid red light on the Power/Standby indicator.
WARNING! When in Standby, mains power is still supplied to Energizer, but the fence is not live.
Remote Control Low Battery
A fl at battery is indicated by the LED giving 5 quick fl ashes, either when the button is being pushed or the Remote
receives a fence pulse.
Remote Control Electrical Interference
The Energizer has four sensitivity settings at which the Energizer will detect the Remote Control signal. The more
sensitive the setting is, the greater the operating range of Remote Control. However, at the high sensitivity levels,
the Energizer will be more sensitive to detecting unwanted electrical signals (interference) from nearby electrical
equipment such as overhead power lines, military activity, radio frequencies, water pumps, etc. When the Energizer
detects electrical interference the Power/Standby light fl ashes
red and the Energizer ignores the Remote Control signal. In this
event, reduce the sensitivity via the switches on the back of the
Energizer until the light stops fl ashing.
IMPORTANT!
Remote Control Codes
The Energizer and Remote Control have four different identity settings. In the event that your neighbour has a
Remote Control (as a result your neighbour can unintentionally
switch your Energizer in or out of Standby) you can change the
code to another setting via the switches on the back of the
Energizer and inside the Remote Control. Note: the Remote
Control code and Energizer code must match in order for the
Remote Control to work.
Remote
Control
Switches
1 2 3 4 5 6 7 8
ON
Level 1
Most
sensitive
DEFAULT
Level 2 Level 3 Level 4
Least
sensitive
SWITCHES 5 & 6
ON ON ON ON
KEY:
ON: Switch is up
OFF: Switch is down
1 2 3 4 5 6 7 8
ON
Setting 1
DEFAULT
Setting 2 Setting 3 Setting 4
ENERGIZER: SWITCHES 1 & 2
PLUS REMOTE CONTROL:
SWITCHES 1 & 2
ON ON ON ON
KEY:
ON: Switch is up
OFF: Switch is down
Remote Control Disable
The Remote Control Disable option sets the Energizer to ignore all Remote Control signals and will prevent the
Energizer from switching into Standby. This feature can be used when it is
important that the fence must not be accidentally switched into Standby.
The Remote Control Disable option is set via switch 4 on the back of the
Energizer.
Full Power/Low Power
The Energizer has full power and low power options. Full power (the default
setting) is for general use. Low power is an option for very short fences or to
reduce fire risk in dry conditions.
1 2 3 4 5 6 7 8
ON
Enabled
Disabled
DEFAULT
SWITCH 4
ON ON
KEY:
ON: Switch is up
OFF: Switch is down
1 2 3 4 5 6 7 8
ON
Full Power
DEFAULT
Low Power
SWITCH 8
ON ON
KEY:
ON: Switch is up
OFF: Switch is down
English
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gallagher MR2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gallagher MR2500 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info