Manual Fuxtec FX-KSP250 (page 44 of 99) (English, German, French, Italian)

781774

Zoom out

Zoom in

1/99

Original manual for petrol chainsaw FX-KSP series

◼ Place the chainsaw down in a way that it

cannot tip over. No fuel should escape!

◼ Unscrew the fuel tank cap (1.) and re-

move (2.).

◼ With a piece of wire bent at the end, pull

out the filter insert (3.).

◼ Wash the filter insert with petrol or renew if

necessary.

◼ Perform a visual check of the cap seal and

also renew if necessary.

◼ Insert the filter insert and screw on the cap

firmly.

Removing the spark plug

◼ Pull off the spark plug connector.

◼ Unscrew the spark plug in anti-clockwise

direction with a spark plug wrench (C)

(socket).

◼ Clean the electrodes with a wire brush.

◼ Check the electrode gap with a gauge. Ad-

just to 0.6 … 0.7 mm if necessary.

◼ Screw the spark plug with seal firmly into

the engine housing.

Mounting the spark plug

The components are assembled in the re-

verse order of removal (see diagrams above).

NOTE!

A spark plug wrench of the correct size is in-

cluded.

Cleaning cylinder cooling fins

WARNING!

Heavily contaminated cooling fins will cause

the engine to overheat and result in engine

damage!

◼ Lever off the 2 quick-fit clips on the filter

cover using a screwdriver.

◼ Remove the filter cover and filter.

◼ Pull off the spark plug connector.

◼ Unscrew 5 securing bolts:

− 2 countersunk securing bolts next to

the quick-fit clips

− 2 securing bolts that are accessible af-

ter removing the filter cover; the air filter

must be removed

− 1 countersunk securing bolt on the side

in the area of the chain brake lever.

◼ Lift off the cylinder housing.

◼ Clean the cylinder cooling fins by suitable

means, e.g. a wire brush.

◼ Mount the cylinder housing again.

NOTE!

Ensure, when installing the cylinder housing,

that all switch wires and attachments are lo-

cated back in their original position.

Saw chain

NOTE!

Acquire the necessary information about ac-

cessories (gauges, associated files etc.) and

instructions about resharpening your saw

chain from the manufacturer or a specialist

dealer.

For reliable and trouble-free operation, the

teeth of the saw chain must always be sharp.

The teeth must be resharpened (with a file) if:

− the saw chippings begin to take on a pow-

dery form

− additional effort is required to make a cut

− a straight cut is no longer possible

− heavy vibrations are experienced

− the fuel consumption increases.

Adhere to the following angles when resharp-

ening manually:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-KSP250 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2.58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fuxtec FX-KSP250 Manual

Product: