781774

Fuxtec FX-KSP250 Manual

42
Zoom out
Zoom in
Previous page
1/99
Next page
Original manual for petrol chainsaw FX-KSP series
Area A
◼ First cut from the bottom up to approx. 1/3
of the trunk's diameter (1).
◼ Then cut from the top down to complete
the cut (2).
Area B
◼ First cut from the top down to approx. 1/3
of the trunk's diameter (1).
◼ Then cut from the bottom up to complete
the cut (2).
Cutting branches - tree on the
ground
CAUTION!
Risk of injury!
Be aware of branches that could fling back
during work.
First check in which direction the branch is bent.
◼ Make the first cut on the inside of the
bend (1).
◼ Then cut through the branch from the
opposite side (2).
Cutting branches - tree standing
CAUTION!
Risk of injury!
Ensure that suitable measures are taken for
personal safety when cutting branches off
standing trees.
− Ensure that the ladder or means of ac-
cess is of a sufficient length.
− Do not use structurally weak ladders.
− Always keep your centre of gravity in
mind when performing work.
− Do not overstretch.
− Do not saw above shoulder height.
− Always hold the chainsaw with both hands.
◼ First cut the branch from the bottom up (1).
◼ Then cut through the branch from the top (2).
Maintenance and care
WARNING!
Risk of injury!
Sharp saw chain! Wear safety gloves when
working with the saw chain.
In the interest of personal safety!
Only perform the maintenance tasks de-
scribed here yourself.
All other work, particularly engine servicing
and repair, must be carried out by qualified,
authorised specialist personnel. If work is per-
formed incorrectly, equipment damage may
ensue which can cause very serious injuries.
WARNING!
Before carrying out any maintenance, repair,
cleaning and inspection measures, make
sure that the engine is switched off and all of
the components have cooled down. Prevent
unintentional starting of the equipment by
pulling out the spark plug connector.
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuxtec FX-KSP250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-KSP250 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2.58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info