781774

Fuxtec FX-KSP250 Manual

45
Zoom out
Zoom in
Previous page
1/99
Next page
Original manual for petrol chainsaw FX-KSP series
45
W1
Sharpening
angle
Depending on saw
chain 25° - 35°
W2
Side plate angle
60°
W3
Cutting angle
85°
4
Saw tooth length
minimum 4 mm
5
Refiling angle
25° - 35°
6
Cutting angle
85°
7
Side plate angle
60°
NOTE!
If sharpening with a suitable file gauge and as-
sociated files, the aforementioned angles can
be disregarded. These are preset in this case
by the location and dimensions of the gauge.
CAUTION!
Risk of injury! Instructions for refiling:
− Switch off the engine and allow it to cool
down
− Activate the chain brake
− Firmly clamp the saw chain in the guide
rail
− Wear safety gloves with cut protection
− Use files and gauges suitable for the
saw chain – these vary depending on
the model!
Model FX-KS155/162: 0.325 / 058-72
Sharpening the saw teeth
Prerequisite: All of the tools and equipment
required for the type of chain (file gauge for
saw teeth, depth gauge, round and flat files)
are ready for use.
NOTE
File gauge for saw teeth, depth gauge and
flat files are not provided. Round files are in-
cluded!
◼ Clamp the guide rail and the chainsaw
firmly in the vice of a workbench.
◼ Place the file gauge on the saw chain
− Arrows on the file gauge point in the
chain direction of rotation.
− Ensure that the file gauge is fully in
contact with the saw chain.
◼ Place the correct sized round file on the
guides of the file gauge.
− Using the round file at the
prescribed file angle (25° - 35° depending
on the type of chain) and holding it with
two hands, sharpen every second saw
tooth with even file movements away
from the body.
◼ Remove the guide rail from the vice and
clamp it in the opposite direction.
◼ Now sharp all remaining saw teeth.
Depth stop
1
Depth gauge file direction (flat file)
2
Round off tooth shoulder
3
Depth gauge standard dimension
0.65 mm
◼ After sharpening the saw teeth, place the
depth gauge on the saw chain.
◼ File the saw teeth to the prescribed depth.
◼ Round off the front edges of the tooth
shoulders to:
− minimise the risk of kickback
− minimise the risk of the retaining straps
tearing.
Guide rail wear
The guide rail must be checked at regular in-
tervals for wear of the guide groove.
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuxtec FX-KSP250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-KSP250 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2.58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info