781774
46
Zoom out
Zoom in
Previous page
1/99
Next page
Original manual for petrol chainsaw FX-KSP series
The guide groove must be perpendicular for
operationally safe and smooth running of the
saw chain.
Rotate the guide rail at regular intervals to
avoid one-sided wear.
1
Ruler
2
Gap
3
No gap
4
Chain runs properly in chain groove
low risk!
5
Increased risk of accident!
Chain runs at an angle in chain groove
Checking the guide rail
Place a ruler against the guide rail and the
outside of a saw tooth.
If there is a gap between the guide rail
and the ruler, the guide groove is in
good order
If there is no gap, the guide groove is
worn.
If the guide groove is worn, turn the guide
rail around or renew it.
Further notes
CAUTION!
Clean the chainsaw after every operation. Neg-
ligence regarding the cleaning measures may
lead to material damage and malfunctions.
Do not spray the chainsaw with water.
Keep the vent slots clean and free of dust.
Clean the saw chain and guide rail after
every use.
For external cleaning, use a soft cloth and
a soft brush.
Clean the tank cap seals regularly and re-
place if necessary.
Storage
Store the equipment in a dry and frost-pro-
tected location (1C 2C).
Fit the transit cover on the saw chain.
Keep all plastic parts away from brake
fluid, petrol, products containing mineral
oil, penetrating oil etc.
These contain substances that can dam-
age or destroy the plastic parts.
Fertilizers and other garden chemicals
contain substances that have a strong cor-
rosive effect on metal parts. Therefore, do
not store the chainsaw near substances of
this kind.
Only store the chainsaw with the fuel tank
and oil tank empty.
Transport
CAUTION!
Risk of injury!
If transporting and changing location during
work, always switch off the chainsaw!
For short distances:
WARNING!
Acute risk of accident!
Under no circumstances should the chainsaw
be transported while the chain is running!
Fit the transit cover.
Activate the chain brake.
Carry the chainsaw by the front handle with
the guide rail pointing towards the rear.
For transport with a vehicle:
Allow the chainsaw to cool down before
any transportation.
Activate the chain brake.
Fit the transit cover.
Always secure the chainsaw to prevent it
from falling down or slipping.
Only transport the chainsaw with the fuel
tank and oil tank empty.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuxtec FX-KSP250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-KSP250 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2.58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info