566460
32
Zoom out
Zoom in
Previous page
1/94
Next page
32

2) Observing the up/down switch position indicator, change the dual rate value for the respective channel
using the DATA INPUT lever until the desired control throw is achieved.
Again, if the arrow is pointing upward, the rate is being adjusted for the up position of the switch.
 
for the low rate.
3) Press the SELECT key to change the switch position indicator to the opposite position.
Note: This assumes that the modeler has adjusted the up switch position. If the down switch position was
adjusted, the SELECT key will move to the next channel or switch selection menu as the case may be.
4) Change the dual rate value for the respective channel using the DATA INPUT lever until the desired
control throw is achieved.
5) Repeat the procedure for the remaining channels and switch positions as desired.
6) Press and hold the END button to save these settings and exit the programming menu.
Exponential Settings (EXPO) - HELI
Exponential, or EXPO as it is commonly abbreviated, affects the travel of the servos around their center in
relationship to stick movement. Exponential does NOT impact the overall travel volume of the servos. A
    


neutral position.
The T6J transmitter offers exponential adjustments for the ailerons, elevator and rudder channels. The EXPO
settings are controlled by the switch that has been selected for the dual rates (D/R). As with the dual rates
settings, the exponentials are also simultaneously activated.

the end points (explained in End Point Adjustment on page
??).
To set the exponentials:
1) Turn the transmitter on.
32


Need help? Post your question in this forum.

Forumrules
1

Forum

futaba-t6j---2.4ghz

Reset search

  • Sorry my bad english, did you have the manual in spanish? Submitted on 6-10-2021 at 05:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba T6J - 2.4GHz at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba T6J - 2.4GHz in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info