Manual Futaba T6J - 2.4GHz (page 33 of 94) (English)

566460

Zoom out

Zoom in

1/94

2) Press and hold the MODE button to access the programming mode.

3) Press either the MODE key OR the END key to scroll through the function menus.

Continue pressing the MODE or END key until the exponentials (EXPO) menu

appears on screen.

4) Press the SELECT key to choose the desired channel (1-aileron, 2-elevator, 4- rudder [tail rotor]) and

switch position. The channel number appears on the left side of the screen. The switch position (up or

down) is indicated by the arrow above or below the channel indicator. The channel number appears on the

left side of the screen.

5) Observing the up/down switch position indicator, change the exponential value for the respective channel

using the DATA INPUT lever until the desired sensitivity of the respective gimbal stick near center is

achieved.

Again, if the arrow is pointing upward, the rate is being adjusted for the up position of the switch. Generally,



rate.

6) Change the exponential rate value for the respective channel using the DATA INPUT lever until the





7 Press the SELECT key to change the switch position indicator to the opposite position.

Note: This assumes that the modeler has adjusted the up switch position. If the down switch position was

adjusted, the SELECT key will move to the next channel or switch selection menu as the case may be.

8) Change the dual rate value for the respective channel using the DATA INPUT lever until the desired

control throw is achieved.

9) Repeat the procedure for the remaining channels and switch positions as desired.

10) Press and hold the END button to save these settings and exit the programming menu.

End Point Adjustment (EPA)-

   

    

connected to the servo arms and control horns so that the correct, or near correct control surface throw will



            

below 70% or above 120% to get the desired throw, you should strongly consider changing the pushrod

Sorry my bad english, did you have the manual in spanish? Submitted on 6-10-2021 at 05:09
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Futaba T6J - 2.4GHz in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Futaba T6J - 2.4GHz Manual

Product: