566460
31
Zoom out
Zoom in
Previous page
1/94
Next page
31
The T6J transmitter offers dual rates on the aileron, elevator and rudder channels. The dual rates are
assignable to switches A, B or IDL on the transmitter and are simultaneously activated by the dual rate switch
selected.
The amount of travel decrease for each control may be set between 0% and 140% of the values set for the
end points (explained in End Point Adjustment on page 33).
Note: It is possible to set a dual rate value to zero, thus causing no response from that channel when the dual
rates are activated. If the dual rates are inadvertently set to zero, a crash could result.
Note:      

Dual Rate Settings (HELI)
To select the Switch/position to control the dual rates:
Prior to programming the dual rates for the aileron, elevator or rudder channels, we suggest selection of the
switch that will be utilized to control the rate settings.
1) Turn the transmitter on.
2) Press and hold the MODE button to access the programming mode. An audible double beep will be heard
and the default screen will change accordingly.
3) Press either the MODE key OR the END key to scroll through the function
menus. Each time one of the aforementioned keys is pressed the menu will change
accordingly. Continue pressing the MODE or END key until the dual rates (D/R)
menu appears on screen.
4) Press the SELECT key six (6) times to scroll past the channel settings to access the switch selection
options.
5) Press the DATA INPUT lever either upward or downward until the desired switch selection appears
onscreen. The options are switch A or B, or the IDL (idle up) switch.
4) Next, press the SELECT key one time to proceed to adjust the dual rates.
To adjust the dual rates:
1) Press the SELECT key to choose the desired channel (1-aileron, 2-elevator, 4- rudder [tail rotor]) and
switch position. The channel number appears on the left side of the screen. The switch position (up or
31


Need help? Post your question in this forum.

Forumrules
1

Forum

futaba-t6j---2.4ghz

Reset search

  • Sorry my bad english, did you have the manual in spanish? Submitted on 6-10-2021 at 05:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba T6J - 2.4GHz at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba T6J - 2.4GHz in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info