566460
30
Zoom out
Zoom in
Previous page
1/94
Next page
30

the end points (explained in End Point Adjustment on page 33).
To set the exponentials:
1) Turn the transmitter on.
2) Press and hold the MODE button to access the programming mode.
3) Press either the MODE key OR the END key to scroll through the function menus.
Continue pressing the MODE or END key until the exponentials (EXPO) menu
appears on screen.
4) Press the SELECT key to choose the desired channel (1-aileron, 2-elevator, 4- rudder) and switch position.
The channel number appears on the left side of the screen. The switch position (up or down) is indicated by
the arrow above or below the channel indicator. The channel number appears on the left side of the screen.
5) Place the dual rate switch, selected previously, (which also serves as the exponential switch) in the desired

position on the left side of the LCD. If the arrow is pointing upward, the exponential is being adjusted for
the up position of the switch.
6) Change the exponential rate value for the respective channel using the DATA INPUT lever until the


7) Place the dual rate/exponential switch in the opposite position, adjust the rates accordingly.
8) Repeat the procedure for the remaining channels as desired.
9) Press and hold the END button to save these settings and exit the programming menu.
HELI Dual Rates/Exponential Information:
Dual Rates (HELI):

thus affecting the overall travel of the servo(s). Thus, decreasing the percentage value for a given servo will
reduce the travel amount of the channel respectively.
For example, if the rudder of the helicopter travels 1/2” at the high rate and maximum stick input, and a value
of 50% is input for the low rate, when the switch is moved to the low rate position, the servo moves exactly

maximum travel is now 1/4”
30


Need help? Post your question in this forum.

Forumrules
1

Forum

futaba-t6j---2.4ghz

Reset search

  • Sorry my bad english, did you have the manual in spanish? Submitted on 6-10-2021 at 05:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba T6J - 2.4GHz at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba T6J - 2.4GHz in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info