747917
199
Zoom out
Zoom in
Previous page
1/228
Next page
199
GO to TABLE OF CONTENTS
SwashDetailSwashDetail
(7) ELE PIT: elevator collective pitch mixing rate
During back and forward elevator inputs at middle collective, check if the
swash plate is raising or lowering during the input.
[Setting method] Operate the transmitter stick in the direction you want to
set. Touch the button lit in green to enter the setting mode and adjust the
mixing rate. Do the same for the other side.
Note: This setting can not be used when H4-00 swash mode is selected.
Settingranges:30~150%Initialvalue:H3-120=50%,exceptH3-120=100%
(8) ELE AIL: elevator aileron mixing rate
While moving the elevator back and forth at middle collective, check to
make sure the aileron axis is staying level.
[Setting method] Operate the transmitter stick in the direction you want to
set. Touch the button lit in green to enter the setting mode and adjust the
mixing rate. Do the same for the other side.
Note: This setting can not be used when H4-00 swash mode is selected.
Settingranges:30~150%Initialvalue:H3-120=50%,exceptH3-120=100%
(9) ELE ELE2: elevator 2nd elevator mixing rate
This parameter adjusts the elevator to 2nd elevator mixing rate. The rate
can be adjusted separately for up and down directions individually.
Note: This setting is only available if the H4-xx swash mode has been
selected.
Settingranges:30~150%Initialvalue:100%
(10) AIL High / AIL Low: Linkage compensation aileron
At HIGH pitch and LOW pitch check to make sure that the swash plate is
staying level on the elevator and collective axis when using aileron inputs.
If the swash plate is rising or falling:
[Setting method] Operate the transmitter stick in the direction you want to
set. Touch the button lit in green to enter the setting mode and adjust the
mixing rate. Do the same for the other side.
Note: check all four directions: high/right; high/left; low/right; low/left
Settingranges:0~100%Initialvalue:0%
(11) AIL Dir: Compensation direction of the aileron
If the above Data (+/-) correction from 0-100 is NOT in the correct compen-
sation direction, change the value from [+] or [-].
Setting:+/-Initialsetting:+
199


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba T-16IZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba T-16IZ in the language / languages: English as an attachment in your email.

The manual is 35,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info