30098
11
Zoom out
Zoom in
Previous page
1/36
Next page
OPERATING INSTRUCTIONS
1. Tachometer
Set the tachometer/times POWER switch
to ON.
appears on the display. Next, press the
MODE
SEL key
switch
at
the
upper-right
corner
three times. The display changes to and
the tachometer mode is selected. Hold the sensor
about 20 to 30 cm from the rotating propeller
(two blade). The propeller speed is displayed on
the
LCD.
indicates
that
the
propeller
is
rotating
at
12,300
rpm.
For propeller
speeds
up
to
30,000
rpm, set the REVOLUTION RANGE switch at the
upper left-hand corner to LOW and for propeller
speeds above 30,000 rpm, set the REVOLUTION
RANGE switch to HIGH.
The speed of a three blade propeller is displayed
value divided b y 3x2.
The speed of a four blade propeller is 1/2 the dis-
played value.
Connect the accessory tachometer
sensor to the sensor connector 28
as shown above.
Fig.
20
Make all speed measurements outdoors under natural
lighting. Accurate speed measurements cannot be made
indoors under artificial lighting becau se of the affect
of the 50 or 60 Hz power.
9
To measure the speed of the main rotor of a
model helicopter, measure the speed of the tail
rotor as shown in Fig. 22 and calculate the exact
speed from the equation.
Main rotor speed =
Tail
rotor
speed
Main rotor and tail rotor gear ratio
Fig.
22
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba FP8SSHP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba FP8SSHP in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info