30098
10
Zoom out
Zoom in
Previous page
1/36
Next page
27.
Tachometer/timer
The
tachometer/timer
has the following func-
tions:
1. Tachometer
•Measurement by external sensor.
•Two blade propeller specifications.
LOW range 100 to 30,000 rpm
Error +100 rpm
•HIGH
range
100
to
60,000
rpm
Error +200 rpm
2. UP TIMER
0 to 60 minutes with seconds displays.
3. DOWN TIMER
•60 to 0 minutes with seconds display
4. INTEGRATING TIMER
0 to 60 hours with minutes display
5. Battery alarm
•This alarm sounds when the transmitter nicd battery
approaches its limit.
NOMENCLATURE AND FUNCTIONS
Do not press the keys too quickly.
Press them at a speed of about once
per second.
MODE DISPLAY
< is displayed at the mode selected at
the MODE SEL key switch.
INTEGRATING TIMER
Blinks during counting
and stops blinking when
counting stops.
UP TIMER
DOWN TIMER
TACHOMETER
[Do not expose the display to direct
sunlight
for
a
long time
Fig.
19
MO
D
E
SEL
KEY
SW
Selects the tachometer/timer mode.
The INTEGRATING TIMER mode is selected and
is displayed when the power is turned on.
The first time this switch is pressed, the UP TIMER
mode is selected and | . is displayed.
The second time it is pressed, the DOWN TIMER
mode
is
selected
and
r
is
displayed.
The third time it is pressed, the TACHOMETER
mode
is
selected
and
is
displayed.
The fourth time this switch is pressed, the
tachometer/timer returns to the INTEGRATING
TIMER mode and is displayed.
TIME SET K EY S W
This switch sets the alarm time in the UP TIMER
and DOWN TIMER modes. One minute is set each
time this key is pressed. If it is pressed and held for
two seconds or longer, the time is set in 5 minute
steps.
A beeping signal begins 10 seconds before the dot
time. A beep is produced every minute to indicate
the lapse of time.
ENTER KEY SW——————————————————————
This switch is used for memorization, starting,
stopping, and clearing in the UP TIMER and
DOWN TIMER modes. In the INTEGRATING
TIMER mode, this switch acts as the reset switch.
POWER SW!
Tachometer/timer power switch.
8
-REV.RANGE SW
Switches the range when used as a
tachometer. LOW - 100 to 30,000 rpm,
HIGH - 100 to 60,000 rpm
LIQUID CRYSTAL DISPLAY
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba FP8SSHP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba FP8SSHP in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info