30094

Futaba FP8SSAP Manual

20
Zoom out
Zoom in
Previous page
1/44
Next page
ADJUSTMENTS AND FLIGHT TECHNIQUES
CHANNEL SELECT SWITCH
• This switch 48 selects the channel when setting
FS and HOLD functions. It also acts as the chan-
nel select switch for SERVO TEST function.
When switch 49 is set to RESET, the Channel
Select switch is used to designate the function
(ATV, FS, BFS memory, or ALL) to be cleared
by Buttons [46] and [47]. Note that the positions
on switch 48 have a different meaning when
the Function Select Switch is set on RESET.
This is summarized in the table below:
[48] Channel select switch
(48] Relationship among channel select switch
number, servo and reset.
No.
1.
2.
3.
4.
5.
6.
7.
8.
RESET &
TEST ALL
OFF
At switch [49] FS SELECT,
ATV. TESTA.B
Aileron
Elevator
Throttle
Rudder
Channel 5 switch (landing
gear)
Flaps
Channel 7 knob (spoiler)
Channel 8 lever (variable
pitch)
All the servos are
operated at servo
test.
Usually set to this OFF position.
At switch [49]
RESET
FS (fail safe)
ATV
BFS memory
FS,
ATV, and
BFS
memory are reset
simultaneously.
FUNCTION SELECT SWITCH
• This switch selects the function to be set (ATV,
FS, BFS memory) or test (A or B) to be per-
formed. It is also used in the RESET position to
clear ATV, FS, and BFS memory (in conjunction
with [46], [47], and 48). Note: In RESET posi-
tion, the Channel Select Switch 48 is used to
designate the function(s) to be cleared.
[49] Function select switch
Fig.
23
• Normally set it to OFF.
1.FS
ALL
Switch
to
this position when setting fail
safe
for
all channels, FS is described in the "HOW
TO
USE FS" section.
2.FS SELECT
This position allows setting of fail safe and
hold as described in the "HOW TO USE
FS" section.
3.ATV
This position allows setting ATV as describ-
ed in the "HOW TO USE ATV" section.
4.TEST A
This position allows servo test
A as described
in the "SERVO TEST" section.
5.TEST B
This position allows servo test
B as described
in the "SERVO TEST" section.
6.BFS MEMO
SET
Switch to this position when setting the
BFS
release point as described in the "BATTERY
FS
MEMORY SETTING" section.
7.OFF
Normally set to this position.
18
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba FP8SSAP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba FP8SSAP in the language / languages: English as an attachment in your email.

The manual is 2,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info