648605
50
Zoom out
Zoom in
Previous page
1/62
Next page
Doc. P/N: WSP-009-004
Version: V1.3
Issue Date: August 2013
www.wassp.com
Page 50 of 62
Operator Manual
7.1 The System is transmitting too slowly, how can I speed it up?
Remember that the WASSP System system must acquire twice the depth of a single beam
sounder to enable the full seaoor prole across 120°. If the entire prole is to be captured, the
ping rate will need to be at least half that of a standard single beam sounder.
Manually adjusting the range down will increase the ping rate signicantly but will result in the
loss of seaoor information, including break up of the 3-D display after a point. If you are only
interested in the centre beam of the triple beam display, the range control can be reduced to just
over half the current depth in metres. The optimal range is twice the current depth in metres.
The range control should normally be set to automatic (green digital display).
Other programs running at the same time as the WASSP System program consume processing
power and take processing time away from the WASSP System system, slowing down the
rate of transmission. For optimal performance, ensure the WASSP System program is the only
application running.
7.2 The system has stopped transmitting without operator
intervention. Why?
If time is taken from the system by another application for long enough, the WASSP System
may restart transmission in a number of seconds. The WASSP PC is a dedicated system and
should not be used for other applications.
If the system does not restart, try stopping and then starting the system using the MODE
button on the tool bar. If this does not work, try to restart the WASSP System program and the
transceiver. The most likely cause of this is a sudden power supply spike or drop.
7.3 When I press the Transmit button, nothing happens and there is no
activity on the WASSP display. How do I x this?
First make the following checks of your WASSP installation:
Check that the BTxR power is ON and the LED light on the front panel ashes every few
seconds.
Make sure the network cable is connected at both the BTxR and the WASSP PC ends
(unplug and re-plug to make sure).
Check that the Processing Module application is running (look for the icon in the Windows
Taskbar at the bottom of your PC screen) and was running when you started WASSP. If not,
restart the WASSP GUI after running the Processing Module application
Processing
Module icon
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno WMB-3250 Wassp at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno WMB-3250 Wassp in the language / languages: English as an attachment in your email.

The manual is 10,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info