648605
62
Zoom out
Zoom in
Previous page
1/62
Next page
www.wassp.com
65 Gaunt Street
Westhaven
Auckland 1010
New Zealand
PO Box 5849
Auckland 1141
WASSP Ltd. reserve the right to change this manual
without notice.
The information in this manual may not, in whole or in
part, be copied, reproduced, photocopied, translated, or
reduced to any electronic medium or machine readable
form without the prior written consent of WASSP Ltd.
Copyright© 2013 WASSP Ltd. All Rights Reserved.
WASSP Ltd.
Phone: +64 9 373 5595
Fax: +64 9 379 5655
Email: wassp@WASSP.com
Web: www.wassp.com
Dimensions
BTxR: Height: 180 mm.
Width: 221.5 mm.
Length: 535 mm.
Transducer: Height: 94 ± 2 mm.
Width: 164 ± 2 mm.
Length: 327 ± 2 mm.
Specications subject to change without notice.
WASSP PC
Serial Ports: 4 - Motion / Position Sensors.
Ethernet Port: 2 - BTxR / 3rd Party Hydrographic
Software
Displays: 1 or 2 - Owner supplied.
Minimum resolution 1024x768.
Inputs: Keyboard and Mouse / Trackball
BTxR
Output power:
Pulse Lengths:
TX rate:
Frequency:
Beam width:
Depth Range:
Depth Resolution:
14 power settings from 40 W to 1 kW.
0.1 - 2.0 ms
Automatic ping rate, determined by
depth. Max ping rate 40 Hz.
160 kHz.
224 beams equidistant spacing over
120º port/starboard swath, Transmit 4º
fore/aft, Receive 10º fore/aft.
2 - 200 m.
75 mm.
Display
Display range:
Range
Shift
5 to 200 m.
5 to 200 m.
Display modes: Sonar View.
Single Beam View.
Waterfall View.
Sidescan View.
Display windows: The eight window layout options:
Single Screen Layout.
Vertical Split Screen Layout
Horizontal Split Screen Layout
3-Screen (3 options)
4-Screen Layout
Resize individual windows button.
Advance speed: Slow – fast (5 speeds).
Interface
Inputs: NMEA 0183 and RS232
Position, Roll, Pitch, Heave.
Outputs: Ethernet
Navigator, Third Party Hydrographic
Software
Raw Data
GSF Data
Recording: Navigator maps (bathymetric data)
Raw Data
GSF Data
Power Supply
BTxR:
WASSP PC:
24 V DC, 70 W.
9 - 32 V DC
Check the PC power supply to
verify this before connecting an
incorrect voltage!
Environmental
Temperature:
Relative humidity:
Vibration:
0 to 40 ºC.
5 to 95% non condensing.
IEC 60945, protected equipment.
Weight
BTxR:
Transducer:
5 kg.
12 kg including cable (10m).
Equipment List
Standard:
Transducer:
See “13. APPENDIX A - Part
Numbers” on page 64 of the
Installation Manual for a full list.
Mounting options through hull or pole
mounted.
Optional cable lengths; 5 m, 10 m
and 15 m
Glands:
BTxR
WASSP PC
Options for alloy, steel or plastic.
Options: See “13. APPENDIX A - Part
Numbers” on page 64 of the
Installation Manual for a full list.
Technical Specications
Doc. P/N: WSP-009-005
Version: V1.3
Issue Date: August 2013
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno WMB-3250 Wassp at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno WMB-3250 Wassp in the language / languages: English as an attachment in your email.

The manual is 10,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info