648605

Furuno WMB-3250 Wassp Manual

48
Zoom out
Zoom in
Previous page
1/62
Next page
Doc. P/N: WSP-009-004
Version: V1.3
Issue Date: August 2013
www.wassp.com
Page 48 of 62
Operator Manual
4
Check the NMEA Settings. Refer to Installation Manual section
“8. Sensors” on page 26. If any of the Activity indicators are red,
congure the port settings correctly. Check the NMEA data is being
received.
5
If the system is correctly congured and the BTxR is ON, the button
turns YELLOW almost immediately while performing a self calibration,
and turns BLUE approximately 3 seconds later. See “4.2 Transmit Mode
Button” on page 13.
6
Click the Transmit Mode button to start pinging.
7
Conrm ping.
The MODE button should animate showing a ping from the vessel.
8
Adjust the range until the picture can be seen on the sonar view.
(Double-click on the digital display to switch to auto-ranging).
9
Conrm the Waterfall view draws seaoor at right angles to the direction
of travel.
If Navigator is installed, this can be veried on the Navigator Display
(refer to Navigator Manual).
10
Double-click the Power Level indicator until it turns GREEN or BLUE
(Auto Power).
11
Click each view and conrm that all views display and draw.
12
If the seaoor prole is being drawn but with signicant errors, change
the Minimisation. See “Figure 6. Advanced Options Window” on page
14.
Turn on the seaoor line to conrm the state of the seaoor detection
algorithm. Use Auto Power by Signal (BLUE) until you are condent
with the system operation.
13
The system requires GPS position, time, motion and ship’s true heading
to create a correct sea prole on the displays.
For accepted NMEA sentences and supported sensors, refer to “8.
Sensors” on page 26 of the Installation Manual.
… 48 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno WMB-3250 Wassp at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno WMB-3250 Wassp in the language / languages: English as an attachment in your email.

The manual is 10,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info