522136
29
Zoom out
Zoom in
Previous page
1/47
Next page
22
3. MAINTENANCE,
TROUBLESHOOTING
WARNING
ELECTRICAL SHOCK HAZARD
Do not open the equipment.
Only qualified personnel should work
inside the equipment.
3.1 Maintenance
Regular maintenance is essential for good
performance. Checking the items listed in
the table below monthly will help keep your
equipment in good shape for years to
come.
Checking
Item Action
Transducer
cable
Check cable for damage.
Power cable,
transducer
cable plug
Check that they are tightly
fastened. Refasten if
necessary.
Display unit
ground
Check for corrosion. Clean
if necessary.
Power supply
voltage
Check voltage. If out of
rating correct problem.
3.2 Cleaning the Display
Unit
Dust or dirt on the display unit can be
removed with a soft cloth. If desired, a
water-moistened cloth may be used. Use
special care when cleaning the LCD since it
scratches easily. Do not use chemical
cleaners to clean the display unit - they can
remove paint and markings.
3.3 Transducer
Maintenance
Marine life on the transducer face will result
in a gradual decrease in sensitivity. Check
the transducer face for cleanliness each
time the boat is dry-docked. Carefully
remove any marine life with a piece of
wood or fine-grade sandpaper.
3.4 Replacing the Fuse
The fuse in the power cable protects the
system from reverse polarity of the power
supply and equipment fault. If the fuse
blows, find the cause before replacing it.
Use only a 1A fuse (61NM-125V, 1A, or
equivalent FGBO-A, AC125V, 1A, Code No.
000-549-061). Using the wrong fuse will
damage the unit and void the warranty.
WARNING
Use the proper fuse.
Fuse rating is shown on the equipment.
Use of a wrong fuse can result in fire and
damage the equipment.
3.5 Battery Voltage Alert
A battery icon appears when the battery
voltage is too high or too low.
Battery icon and meaning
Icon Meaning
Voltage is lower than 10 VDC. If the
voltage goes below 9 V, the equipment
is automatically turned off.
Voltage is higher than 16.5 VDC. If the
voltage goes higher than 17.5 V, the
equipment is automatically turned off.
www.Busse-Yachtshop.de email: info@busse-yachtshop.de
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno LS-6100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno LS-6100 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info