522136
27
Zoom out
Zoom in
Previous page
1/47
Next page
20
Page 3
BASIC RANGE 1 - BASIC RANGE 8: Set
range of each of the eight basic ranges.
Note 1: All default basic ranges are
restored whenever the depth unit is
changed. Therefore, change the depth unit
before changing the basic ranges.
Note 2: A range may not be lower than the
range preceding it. For example, if basic
range 3 is 60 feet, basic range 4 must be
greater than 60 feet.
ZOOM RANGE: Choose the range to zoom
in the marker-zoom and bottom-zoom
modes. You may choose a range between
7 and 150 feet (2 and 50 meters).
B/L RANGE: The expansion width for the
bottom-lock display can be chosen from 10
to 30 feet (3 and 10 meters).
ZOOM MARKER: The zoom marker
appears in the normal, bottom marker and
bottom zoom displays and marks the area
which is expanded in the bottom marker
and bottom zoom pictures. You can turn the
marker on or off as desired.
2.2 Installation Menu
The installation menu contains items which
once set do not require frequent
adjustment.
1. Turn on the power while pressing the
[MENU/ESC] key. Continue pressing the
[MENU/ESC] key until the Installation
menu appears.
SIMULATION On
TEST ...
LCD PATTERN ...
MEMORY CLEAR
NMEA PORT : In/Out
NMEA MIX : Off
GPS WAAS* : Off
SET BOTTOM LEVEL ..
Installation Menu
* = Setting cannot be changed when
NMEA PORT setting is "IN/IN."
Installation menu
SIMULATION: The simulation mode
provides, without connection of the
transducer, simulated operation of the
equipment, using internally generated
echoes. All controls are operative. The
message “SIM” appears at the top right
corner on the screen when the simulation
mode is active.
1. At the installation menu, press to
open the simulation mode options
window.
2. Press to choose “On” to turn on the
simulation mode.
3. Press the [POWER/BRILL] key about
three seconds to turn off the power.
4. Press the [POWER/BRILL] key to turn
on the power. “SIM” appears at the top
right corner of the display
5. To turn off the simulation mode, select
Off at step 2.
www.Busse-Yachtshop.de email: info@busse-yachtshop.de
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno LS-6100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno LS-6100 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info